This is an internal version that might contain incomplete information.

Engineering Materials and Manufacturing Technology, 6 credits

Material och tillverkningsteknik, 6 hp

TMKO02

Course starting semester

Main field of study

Mechanical Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Johan Moverare

Director of studies or equivalent

Viktor Norman

Education components

Preliminary scheduled hours: 46 h
Recommended self-study hours: 114 h

Available for exchange students

Yes

Possible deviation from course syllabus/programme syllabus

ECV = Elective / Compulsory / Voluntary

Course offered for		Semester	Period	Timetable module	Language	Campus	ECV
6CDPU	Design and Product Development, Master of Science in Engineering	7 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E
6CMMM	Mechanical Engineering, Master of Science in Engineering	7 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E
6CMMM	Mechanical Engineering, Master of Science in Engineering (Engineering materials)	7 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	C
6CMMM	Mechanical Engineering, Master of Science in Engineering (Production Engineering)	9 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E
6MMEC	Mechanical Engineering, Master's Programme	3 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E
6MMEC	Mechanical Engineering, Master's Programme (Engineering Materials)	3 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E
6MMEC	Mechanical Engineering, Master's Programme (Manufacturing Engineering)	3 (Autumn 2024)	1	2	Swedish/English	Linköping, Valla	E

Main field of study

Mechanical Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

Master of Science in Mechanical Engineering
Master of Science in Design and Product Development
Master's Programme in Mechanical Engineering

Prerequisites

Basic courses in Engineering materials and Solid mechanics.

Intended learning outcomes

The intended learning outcomes of the course is to familiarise the student with the material aspects of manufacturing technology. After completed course the student should:

Understand the basic physical metallurgy of Steels, Aluminium alloys, Titanium alloys and Nickel-base superalloys.
Understand the interaction between processing, microstructure and properties of metallic materials.
Understand the possibilities and challenges of different manufacturing techniques from a materials perspective.
Be able to select suitable manufacturing method for a specific material.
Be able to select suitable material for a specific manufacturing method.
Be able to applied this knowledge when communicating and solving industrial problems.

Course content

Material aspects on industrial manufacturing processes, like casting, welding, metal forming, forging, metal cutting, and additive manufacturing.
Phase diagrams and alloy theory
Solidification and diffusion
Work-hardening and annealing
Steel transformations
Precipitation hardening
Microstructure and properties of the most common groups of metallic materials; Steel, Cast iron, Aluminium, Titan- and Nickel-based alloys
Heat treatments and surface treatments

Teaching and working methods

The course consist of lectures, tutorials, laboratory work and home assignments.

Examination

UPG1	Seminar	1 credits	U, G
LAB1	Laboration course	1 credits	U, G
TEN1	Written examination	4 credits	U, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows:

If teaching language is “Swedish”, the course as a whole could be given in Swedish, or partly in English. Examination language is Swedish, but parts of the examination can be in English.
If teaching language is “English”, the course as a whole is taught in English. Examination language is English.
If teaching language is “Swedish/English”, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English depending on teaching language.

Other

The course is conducted in such a way that there are equal opportunities with regard to sex, transgender identity or expression, ethnicity, religion or other belief, disability, sexual orientation and age.

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.

The course is campus-based at the location specified for the course, unless otherwise stated under “Teaching and working methods”. Please note, in a campus-based course occasional remote sessions could be included.

Department

Institutionen för ekonomisk och industriell utveckling

Course literature

Other

Will be presented on the course LISAM page

Code	Name	Scope	Grading scale
UPG1	Seminar	1 credits	U, G
LAB1	Laboration course	1 credits	U, G
TEN1	Written examination	4 credits	U, 3, 4, 5

Student rights and obligations (login required)
Linköping University common rules and regulations (in Swedish)

Other

Will be presented on the course LISAM page

Download

Download course literature list as PDF

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize

		I	U	A	Modules	Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
	1.1 Knowledge of underlying mathematics and science (G1X level)			X		Mathematics basic course, Analysis, Physics, Thermodynamics
	1.2 Fundamental engineering knowledge (G1X level)		X	X	UPG1 LAB1 TEN1	Engineering Materials
	1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)		X	X	UPG1 LAB1 TEN1	Heat Transfer
	1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)		X		TEN1	Teaches physical phenomena relevant to manufacturing techniques such as Solidification, Phase transformations, Diffusion and Deformation mechanisms
	1.5 Insight into current research and development work	X				Addresses current trends for R&D in materials and manufacturing technology
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
	2.1 Analytical reasoning and problem solving	X	X	X	UPG1	Ability to analyze the link between material behaviors and manufacturing method
	2.2 Experimentation, investigation, and knowledge discovery		X		LAB1	Knowledge of basic material analysis methods
	2.3 System thinking	X	X		UPG1	Be able to account for materials and manufacturing technology in an industrial application and context.
	2.4 Attitudes, thought, and learning	X
	2.5 Ethics, equity, and other responsibilities	X				Sustainability aspects linked to materials and manufacturing technology
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
	3.1 Teamwork		X	X	UPG1 LAB1	Group work in labs and for the home assignment
	3.2 Communications		X	X	UPG1	Written and oral presentation of home assignment
	3.3 Communication in foreign languages			X		Course literature in English. UPG1 is presented in English.
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
	4.1 External, societal, and environmental context	X	X		UPG1	Takes into account economic and environmental conditions.
	4.2 Enterprise and business context	X				Takes economic aspects into account.
	4.3 Conceiving, system engineering and management	X	X		UPG1	The home assignment provides the opportunity for an in-depth case study
	4.4 Designing
	4.5 Implementing	X	X		UPG1 TEN1	Provides conditions for selection of materials and manufacturing method for a specific application.
	4.6 Operating
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
	5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development	X	X		UPG1	Takes into account economic and environmental conditions.
	5.2 Economic conditions for knowledge development	X
	5.3 Identification of needs, structuring and planning of research or development projects	X
	5.4 Execution of research or development projects
	5.5 Presentation and evaluation of research or development projects	X

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.