Electro Hydraulic Systems, 6 credits

Elektrohydrauliska system, 6 hp

TMMS13

The course is disused. Offered for the last time Autumn semester 2023. Replaced by TMMS32 till viss del..

Main field of study

Mechanical Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Magnus Sethson

Director of studies or equivalent

David Lundström

Education components

Preliminary scheduled hours: 48 h
Recommended self-study hours: 112 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CMMM Mechanical Engineering, M Sc in Engineering 9 (Autumn 2021) 1 3 Swedish/English Linköping, Valla E
6CMMM Mechanical Engineering, M Sc in Engineering (Mechatronics) 9 (Autumn 2021) 1 3 Swedish/English Linköping, Valla E
6MMEC Mechanical Engineering, Master's Programme 3 (Autumn 2021) 1 3 Swedish/English Linköping, Valla E
6MMEC Mechanical Engineering, Master's Programme (Mechatronics) 3 (Autumn 2021) 1 3 Swedish/English Linköping, Valla E

Main field of study

Mechanical Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Master's Programme in Mechanical Engineering
  • Mechanical Engineering, M Sc in Engineering

Prerequisites

Basic knowledge in fluid power technology, electro machinery, mechanics, dynamical systems, control engineering, programming, electronics, electrical systems and simulation technology.

The elaborative work requires individual preparations and initiativs.  Computer class work benefits from practical experience in use of programming tools, preferable using object oriented syntax. A number of general computational tools may be used such as 3D CAD, Mathematica, MATLAB/Simulink and programming editors.

Intended learning outcomes

The course aims for an increased knowledge about modern multi-axis systems where all subdomains of mechatronics are vital parts such as mechanics, electronics, computer technology and software. The machines studied uses mainly fluid power technology and electro machinery as energy transformation principles but others may occur.

After the course the student should be able to describe in detail the sub-components of a system and their function, integration and control thereof within systems like cranes, fork lift trucks, construction machinery and automated workshop machinery. Both mathematical expressions and simulation models should be fluently used when describing the separate components dynamics in a system. One should acquire a good understanding for the mechanical and control challenges that are related to temperature, wear, vibrations and safety. In parallel to a deepened and widened understanding for the systems functions even verification and measurements on such systems should be studied. The overall goal of the course is that the student should be able to design a controller for a machine that perform a predefined task in a safe way despite its non-real characteristics.

After the course each student should:

  • understand the relations between motion, force, magnetic flow density and electric current in an electromechanical design inducing its limits.
  • be able to handle, evaluate and analyse simulation results from mathematical models of mechatronic systems.
  • be able to create smaller program code snippets implementing control or/and reference signals for control systems.
  • be able to evaluate multi-axis systems based on characteristic performance measures like position error, energy consumption and stability. Both at system and detailed levels.
  • be able to individually describe for a mechatronic design through both digital media and written report.

After the completion of the course the student should have a good and general understanding of the application of the modern computer technology in studies, design and handling of machinery around us and in industry. 

Course content

The course makes primarily use of simulation technology for understanding the phenomena, opposing requirements and challenges that exist within modern multi-axis mechanical systems. Simulation technology is the main method for evaluation of different technical solutions throughout the course, where the student will be challenged with several different problems typical for modern machine design. Example of that include tolerances in parameters, gap, friction, bi-stable systems, dither motions, stiffens variations in actuators and signal delays in digital systems. Load balancing in multi-axis systems with only one power source is an example of how energy efficiency is studied. Based on earlier courses in mechatronics the knowledge about sensors is further extended about measuring mechanical quantities. A major part of the course focus on  integrated analysis of system solutions. Lectures follows the information propagation through mechatronic systems, from sensor to actuator.

Teaching and working methods

The teaching is focused around design tasks with supervised computer class lessons. A minor number of lectures, lessons and elaborative events are also included. Individual work is a most dominant in the course with a special focus on the engineering responsibility for ones own designs and solutions. Throughout the course several major homework design tasks are carried out particularly addressing the individual responsibilities regarding design and analysis of mechatronic systems. Lectures and lessons are focused around handed out research papers.

Examination

UPG1Individual written assignment3 creditsU, 3, 4, 5
LAB2Laboratory work1 creditsU, G
UPG3Assignments2 creditsU, G

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses

The course may be scheduled in close relation to TMPM06 - Project Course Advanced - Mechatronics.

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows: 

  • If teaching language is Swedish, the course as a whole or in large parts, is taught in Swedish. Please note that although teaching language is Swedish, parts of the course could be given in English. Examination language is Swedish. 
  • If teaching language is Swedish/English, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English (depending on teaching language). 
  • If teaching language is English, the course as a whole is taught in English. Examination language is English. 

Other

The course is conducted in a manner where both men's and women's experience and knowledge are made visible and developed. 

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.  

Department

Institutionen för ekonomisk och industriell utveckling

Director of Studies or equivalent

David Lundström

Examiner

Magnus Sethson

Education components

Preliminary scheduled hours: 48 h
Recommended self-study hours: 112 h

Course literature

Books

  • Clarence W. de Silva, CRC Press, Mechatronics, An Integrated Approach
    ISBN: 0-84931274-4
  • William Bolton, Pearson, Mechatronics, Electronic control systems in Mechanical and Electrical Engineering 6
    ISBN: 978-1-292-07668-3
Code Name Scope Grading scale
UPG1 Individual written assignment 3 credits U, 3, 4, 5
LAB2 Laboratory work 1 credits U, G
UPG3 Assignments 2 credits U, G

Course syllabus

A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. 

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Guidelines relating to examinations and examiners 

For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2019-00920 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2017-03931 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

Forms of examination

Principles for examination

Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.

If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

Registration for examination

Until January 31 2021, the following applies according to previous guidelines: In order to take an written, digital or computer-based examination student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

From February 1 2021, new guidelines applies for registration for written, digital or computer-based examination, Dnr LiU-2020-02033 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

A retake is not possible on courses that are included in an issued degree diploma. 

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

  • Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
  • Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
  • Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

Examination components

The following examination components and associated module codes are used at the Faculty of Science and Engineering:

  • Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
  • Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  • Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
  • Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

In general, the following applies:

  • Mandatory course components must be scored and given a module code.
  • Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
  • For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.

For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592). 

For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

Reporting of examination results

The examination results for a student are reported at the relevant department.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Clarence W. de Silva, CRC Press, Mechatronics, An Integrated Approach

ISBN: 0-84931274-4

William Bolton, Pearson, Mechatronics, Electronic control systems in Mechanical and Electrical Engineering 6

ISBN: 978-1-292-07668-3

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
X
X
UPG3
Numerical methods are introduced, math, physics, control theory and programming used. Electronics are extended.
1.2 Fundamental engineering knowledge (G1X level)
X

                            
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
UPG1
LAB2
UPG3
Programming of electro hydraulic systems. Detailed studies using multiple simulation techniques.
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)
X
UPG3
Electromagnetism
1.5 Insight into current research and development work
X
LAB2
Some research results on simulation techniques are used in the studies.
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving

                            
2.2 Experimentation, investigation, and knowledge discovery

                            
2.3 System thinking

                            
2.4 Attitudes, thought, and learning

                            
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork

                            
3.2 Communications

                            
3.3 Communication in foreign languages

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management

                            
4.4 Designing

                            
4.5 Implementing

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.