Production and Distribution, 6 credits

Produktion och distribution, 6 hp

TNSL08

The course is disused. Offered for the last time Autumn semester 2021. Replaced by TNK122.

Main field of study

Logistics

Course level

First cycle

Course type

Programme course

Examiner

Micael Thunberg

Director of studies or equivalent

Erik Bergfeldt

Education components

Preliminary scheduled hours: 40 h
Recommended self-study hours: 120 h
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6KFTL Air Transportation and Logistics, Bachelor's Programme 3 (Autumn 2019) 1, 2 2, 3 Swedish Norrköping, Norrköping C
6KLOG Civic Logistics, Bachelor's Programme 3 (Autumn 2019) 1, 2 2, 3 Swedish Norrköping, Norrköping C
6CKTS Communications, Transport and Infrastructure, Master of Science in Engineering 3 (Autumn 2019) 1, 2 2, 3 Swedish Norrköping, Norrköping C

Main field of study

Logistics

Course level

First cycle

Advancement level

G2X

Course offered for

  • Bachelor's Programme in Civic Logistics
  • Bachelor's Programme in Air Transportation and Logistics
  • Master of Science in Communications, Transport and Infrastructure
  • Air Transportation and Logistics, Bachelor's Programme
  • Civic Logistics, Bachelor's Programme

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

Mathematics corresponding to mathematics for SL, basic knowledge in economics, basic knowledge in statistics and probability theoury

Intended learning outcomes

After completed course, the student shall

  • Be able to describe logistics systems and its actors' different roles.
  • Be able to demonstrate an understanding of the basics of logistics, production and distribution.
  • Be able to demonstrate an understanding of the link between logistics, production and distribution.
  • Have insight into relevant issues regarding industrial production.
  • Understand the principles behind hierarchical (production) planning, and the principles of product structures.
  • Be able to use the most common methods of forecasting.
  • Be able to use the most common inventory management methods.
  • Be able to explain the function of different actors in a distribution system.

 

Course content

  • Basics of logistics and its connection to production and distribution: Actors in the logistics system, order-to-delivery process
  • Basics of inventory management: Lot sizing methods, ordering methods, customer order point
  • Production process and choise: Product / process matrix, production structures / production layout, line balance, network planning.
  • Demand administration: Forecasting, moving averages, exponential smoothing, decomposition with trend, season and level, forecast error and follow-up.
  • Hierarchical production planning: MRP II with sales and operations planning, distribution planning, master production planning, material requirements planning, detailed production planning, rough cut capacity planning, capacity requirements planning.
  • Network perspective on logistics: Supply chain structures in relation to product type, supply chain management, INCOTERMS and law related to logistics.

Teaching and working methods

The course is delivered using lectures, lessons, and laboratory work. Lectures are used for the major part of theory, lessons are for solving numerical examples for problems relating to the course content. Laboratory work may be used for computer based calcuations.

Examination

UPG2Case study2 creditsU, G
UPG1Hand-in assignments1 creditsU, 3, 4, 5
TEN1Written examination3 creditsU, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses:
Logistics and profitability analysis, Logistics networks and transports

Department

Institutionen för teknik och naturvetenskap

Director of Studies or equivalent

Erik Bergfeldt

Examiner

Micael Thunberg

Education components

Preliminary scheduled hours: 40 h
Recommended self-study hours: 120 h

Course literature

Books

  • Jonsson, Patrik, Mattsson, Stig-Arne, (2016) Logistik : läran om effektiva materialflöden 3., [rev.] uppl. Lund : Studentlitteratur, 2016
    ISBN: 9789144110776
    Reference literature
  • Olhager, Jan, (2013) Produktionsekonomi : principer och metoder för utformning, styrning och utveckling av industriell produktion 2., [rev.] uppl. Lund : Studentlitteratur, 2013
    ISBN: 9789144067667
    Primary
Code Name Scope Grading scale
UPG2 Case study 2 credits U, G
UPG1 Hand-in assignments 1 credits U, 3, 4, 5
TEN1 Written examination 3 credits U, 3, 4, 5

Course syllabus

A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Regulations relating to examinations and examiners 

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

  • Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
  • Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
  • If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
  • If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
  3. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  4. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Jonsson, Patrik, Mattsson, Stig-Arne, (2016) Logistik : läran om effektiva materialflöden 3., [rev.] uppl. Lund : Studentlitteratur, 2016

ISBN: 9789144110776

Reference literature

Olhager, Jan, (2013) Produktionsekonomi : principer och metoder för utformning, styrning och utveckling av industriell produktion 2., [rev.] uppl. Lund : Studentlitteratur, 2013

ISBN: 9789144067667

Primary

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
X
TEN1

                            
1.2 Fundamental engineering knowledge (G1X level)
X
X
X
TEN1
UPG1

                            
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
X
UPG1

                            
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
TEN1

                            
2.2 Experimentation, investigation, and knowledge discovery

                            
2.3 System thinking
X
X
TEN1
UPG2

                            
2.4 Attitudes, thought, and learning
X
TEN1
UPG2

                            
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
UPG1
UPG2

                            
3.2 Communications

                            
3.3 Communication in foreign languages

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context
X
X
X
TEN1
UPG2

                            
4.3 Conceiving, system engineering and management

                            
4.4 Designing

                            
4.5 Implementing

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.