Digital Image Processing, 6 credits

Digital bildbehandling grundkurs, 6 hp

TSBB08

Main field of study

Computer Science and Engineering Electrical Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Maria Magnusson

Director of studies or equivalent

Lasse Alfredsson

Education components

Preliminary scheduled hours: 60 h
Recommended self-study hours: 100 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CYYY Applied Physics and Electrical Engineering, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CYYY Applied Physics and Electrical Engineering, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CMED Biomedical Engineering, M Sc in Engineering 9 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CMED Biomedical Engineering, M Sc in Engineering (Biomedical Imaging and Visualization) 9 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6MBME Biomedical Engineering, Master's Programme 3 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (AI and Machine Learning) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CDDD Computer Science and Engineering, M Sc in Engineering (Systems Technology) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (AI and Machine Learning) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Specialization Electrical Engineering) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Specialization Electrical Engineering) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Specialization Electrical Engineering) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Specialization Electrical Engineering) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Specialization Electrical Engineering) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering (Electrical Engineering Specialization) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering (Master Profile Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CITE Information Technology, M Sc in Engineering 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (AI and Machine Learning) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Signal and Image Processing) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla C
6CITE Information Technology, M Sc in Engineering (Systems Technology) 7 (Autumn 2018) 1 4 Swedish/English Linköping, Valla E

Main field of study

Computer Science and Engineering, Electrical Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Biomedical Engineering, Master's Programme
  • Computer Science and Engineering, M Sc in Engineering
  • Industrial Engineering and Management - International, M Sc in Engineering
  • Industrial Engineering and Management, M Sc in Engineering
  • Information Technology, M Sc in Engineering
  • Computer Science and Software Engineering, M Sc in Engineering
  • Applied Physics and Electrical Engineering - International, M Sc in Engineering
  • Applied Physics and Electrical Engineering, M Sc in Engineering
  • Biomedical Engineering, M Sc in Engineering

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

1-D signal processing: deterministic signals, linear systems, convolution, continuous and discrete Fourier transform sampling and reconstruction, the sampling theorem, basic filters (low-pass, high-pass, and band-pass). Linear algebra: vector, matrix, determinant, scalar product, bases, the least square method. One- and multidimensional calculus. Programming in one of the following languages: C, C++, Java, Ada or Matlab.

Intended learning outcomes

The course aims to provide basic knowledge in 2D signal processing and a systematic description about the classical methods and tools for digital image processing. This means that a student which has taken this course is expected to be able to:

  • Describe basics regarding the generalization from 1-D to 2-D signal processing: Continuous and discrete Fourier transform with accompanying theorems, sampling and reconstruction, convolution, re-sampling and interpolation, scale space.
  • Interpret the result of a 2-D Fourier transform of an image, such as what is a spatial frequency and be acquainted with the most common convolution kernels and describe their appearance in the spatial and Fourier domain, respectively.
  • Describe most of the classical image processing methods in the course content, see below.
  • Solve simple image processing problems using Matlab.

Course content

The lectures:

  • Concepts and definitions. From 1-D to 2-D Fourier transform. Continuous and discrete Fourier transform, DFT, FFT. Sampling and reconstruction. Convolution and filtering, translation, scaling, derivative, rotation, and other linear operations on digital images.
  • Convolution kernels in the spatial and Fourier domain, low-pass, derivative (sobel).
  • Resampling and interpolation. Scale space.
  • Color models. Color transformations. Color segmentation.
  • Segmentation: Regional growing, watersheds, labeling. Operations on histogram. Thresholding: automatic, local and with hysteres.
  • Binary image processing: Morphological operations, distance transform, connectivity preserving operations, feature extraction, chain code, polygon approximation and Fourier descriptors.
  • Matched filters and pattern recognition. Edge detection with Sobel and Canny. Hough transform. Line detection. Corner detection. The structure tensor.
  • Image restoration: Inverse filtering, wiener filtering.
  • Non-linear filters: Homomorphic filtering, median filter, max- and min-filter, etc.
The computer exercises:
  • 1) Operations on gray scale images. Linear filters in the spatial and Fourier domain.
  • 2) Resampling and interpolation.
  • 3) Operations on binary images. Histogram and color tables.
  • 4) Automatic thresholding and simple OCR (Optical Character Recognition).
  • 5) Segmentation of cells in microscopy images.
  • 6) Automatic counting of blood cells.
  • 7) Image restoration. Edge detection with Hough transform and Canny. Non-linear filters.

Teaching and working methods

The course consists of lectures, lessons and laboratory assignments based on Matlab.

Examination

LAB2Laboratory Work2 creditsU, G
TEN1Written Examination4 creditsU, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses: Multidimensional signal analysis, Computer Vision, Image Sensors, Image and Audio Coding, Neural Networks and Learning Systems, Medical Image Analysis, Visual Object Recognition and Detection, Project courses regarding images.

Department

Institutionen för systemteknik

Director of Studies or equivalent

Lasse Alfredsson

Examiner

Maria Magnusson

Course website and other links

https://www.cvl.isy.liu.se/education/undergraduate

Education components

Preliminary scheduled hours: 60 h
Recommended self-study hours: 100 h

Course literature

Books

  • Gonzalez, Rafael C., Woods, Richard E., (2008) Digital image processing 3. ed. Upper Saddle River, N.J. : Pearson Prentice Hall, cop. 2008
    ISBN: 9780131687288, 013168728X

Websites

  • Power-Pointpresentationer från föreläsningarna.

Compendia

  • Maria Magnusson, Laborationshäfte i digital bildbehandling

Other

  • 1) Lecture notes

    2) Lesson exercises

    3) Formula collection

    All material above are available in pdf-format at the course home page

Code Name Scope Grading scale
LAB2 Laboratory Work 2 credits U, G
TEN1 Written Examination 4 credits U, 3, 4, 5

Course syllabus

A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Regulations relating to examinations and examiners 

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

  • Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
  • Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
  • If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
  • If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
  3. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  4. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Gonzalez, Rafael C., Woods, Richard E., (2008) Digital image processing 3. ed. Upper Saddle River, N.J. : Pearson Prentice Hall, cop. 2008

ISBN: 9780131687288, 013168728X

Websites

Power-Pointpresentationer från föreläsningarna.

Compendia

Maria Magnusson, Laborationshäfte i digital bildbehandling

Other

1) Lecture notes

2) Lesson exercises

3) Formula collection

All material above are available in pdf-format at the course home page

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X

                            
1.2 Fundamental engineering knowledge (G1X level)
X
X
LAB2
TEN1

                            
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
LAB2
TEN1

                            
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
LAB2
TEN1

                            
2.2 Experimentation, investigation, and knowledge discovery
X
X
LAB2

                            
2.3 System thinking

                            
2.4 Attitudes, thought, and learning
X
X
LAB2

                            
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X

                            
3.2 Communications

                            
3.3 Communication in foreign languages
X

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management
X
X
X
LAB2

                            
4.4 Designing
X
X
X
LAB2

                            
4.5 Implementing
X
X
X
LAB2

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.