Environmental Protection and Environmental Impact Assessments, 9 credits

Miljöskydd och miljökonsekvensbeskrivningar, 9 hp

NBIC48

The course is disused.

Main field of study

Biology

Course level

First cycle

Course type

Programme course

Examiner

Karin Tonderski

Director of studies or equivalent

Agneta Johansson

Education components

Preliminary scheduled hours: 66 h
Recommended self-study hours: 174 h
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6KBIO Biology 6 (Spring 2018) 1 2+3+4 Swedish Linköping, Valla E

Main field of study

Biology

Course level

First cycle

Advancement level

G2X

Course offered for

  • Biology

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

Past exams in courses comparable to 1.25 years of basal biology at Linköping University. Basic knowledge about current environmental problems,

Intended learning outcomes

The course is focused on current practices for environmental management to move towards a sustainable development. It deals with methods and strategies to decrease the environmental impact of human activities, environmental impact assessments and procedures for permit applications. Having successfully completed this course, the student is expected to:

  • know the basic principles of the most commonly used techniques to minimize emissions of environmentally harmful substancesbe to air, water and soil.
  • know how to perform an Environmental Impact Assessment (EIA), what the document should contain, and in which circumstances and for which cases an EIA is required
  • have a basic knowledge about planning processes that are relevant for a sustainable development, and of strategic environmental assessments, including material flow analysis
  • have developed the ability to evaluate documents used in permit applications and environmental planning processes
  • have developed the skills to present arguments in written reports

     

Course content

The course contains In-depth studies of some issues relevant for sustainable development, e.g. management of solid and liquid waste, energy supply and permit processes according to the Environmental Act. This includes:

  • Methods for treatment of gas emissions, wastewater, hazarduous waste and solid waste (case studies);
  • Analysis of waste management systems in Sweden (group study)
  • Evaluation of Environmental Impact Assessment documents and procedures, and of e.g. solid waste and energy plans (seminars and case studies)
  • Prefeasibility study for an Environmental Imapct Assessment (group project)
  • Exercise with Substabnce Flow Analysis

 

Teaching and working methods

The course includes lectures, seminars, group tasks, computer exercises and study visits. Students will partly work with short case studies in groups of three - four persons, producing written reports that are also presented orally. Participants may have to cover transport costs for educational visits. Some of the lectures and instructions may be given in English.

Examination

UPG2At-home examination3 creditsU, G
UPG1Written reports and group assignment presentations6 creditsU, G

Grades are given as ‘Fail’ or ‘Pass’.

Grades

Two grade scale, older version, U, G

Department

Institutionen för fysik, kemi och biologi

Director of Studies or equivalent

Agneta Johansson

Examiner

Karin Tonderski

Course website and other links

Education components

Preliminary scheduled hours: 66 h
Recommended self-study hours: 174 h

Course literature

Books

  • Persson, P.O. (red.) 2005., (2005) Miljöskyddsteknik. Kompendium i Miljöskydd, bokdel 2. 2 Industriell ekologi, KTH, Stockholm
    ISBN: B000272820

Websites

Other

Code Name Scope Grading scale
UPG2 At-home examination 3 credits U, G
UPG1 Written reports and group assignment presentations 6 credits U, G

Grades are given as ‘Fail’ or ‘Pass’.

Course syllabus

A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Regulations relating to examinations and examiners 

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

  • Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
  • Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
  • If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
  • If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
  3. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  4. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Persson, P.O. (red.) 2005., (2005) Miljöskyddsteknik. Kompendium i Miljöskydd, bokdel 2. 2 Industriell ekologi, KTH, Stockholm

ISBN: B000272820

Websites

Naturvårdsverket, Miljöbedömningar av planer och program Miljöbedömningar av planer och program
Naturvårdsverket, Miljökonsekvensbedömning för projekt och åtgärder http://www.naturvardsverket.se/Stod-i-miljoarbetet/Vagledningar/Samhallsplanering/Miljokonsekvensbedomning/

Other

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
UPG1
Knowledge in chemistry and biology is used in case studies and home exam
1.2 Fundamental engineering knowledge (G1X level)
X
X
UPG1
Techniques for environmental protection, theory and case studies
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
UPG2
Environmental impact assessments (home exam)
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
UPG1
UPG2

                            
2.2 Experimentation, investigation, and knowledge discovery

                            
2.3 System thinking
X
X
UPG1
Material flow analysis, case study
2.4 Attitudes, thought, and learning
X
X
UPG1
UPG2
Capacity to argue for selected suggestions when solving case studies, group EIA project and in the home exam ( EIA)
2.5 Ethics, equity, and other responsibilities
X
X
UPG1
Analysing environmental impact assessments and other environmental management documents, performing a prefeasibility EIA.
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
UPG1
Group tasks, different groups
3.2 Communications
X
Participation in seminar discussions, oral presentations
3.3 Communication in foreign languages

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context
X
X
UPG1
Case studies of solid waste and wastewater mgmt,  analysis of planning documents, prefeasibility EIA
4.2 Enterprise and business context
X
UPG1
UPG2
Seminars where EIA and permission processes for industries are discussed
4.3 Conceiving, system engineering and management
X
X
UPG1
Exercise with Material flow analysis or Life Cycle Analysis
4.4 Designing

                            
4.5 Implementing

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.