Engineering Materials and Manufacturing Technology, 6 credits

Material och tillverkningsteknik, 6 hp

TMKO02

Main field of study

Mechanical Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Johan Moverare

Director of studies or equivalent

Viktor Norman

Education components

Preliminary scheduled hours: 46 h
Recommended self-study hours: 114 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CDPU Design and Product Development, Master of Science in Engineering 7 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E
6CMMM Mechanical Engineering, Master of Science in Engineering 7 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E
6CMMM Mechanical Engineering, Master of Science in Engineering (Engineering materials) 7 (Autumn 2025) 1 2 Swedish/English Linköping, Valla C
6CMMM Mechanical Engineering, Master of Science in Engineering (Production Engineering) 9 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E
6MMEC Mechanical Engineering, Master's Programme 3 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E
6MMEC Mechanical Engineering, Master's Programme (Engineering Materials) 3 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E
6MMEC Mechanical Engineering, Master's Programme (Manufacturing Engineering) 3 (Autumn 2025) 1 2 Swedish/English Linköping, Valla E

Main field of study

Mechanical Engineering

Course level

Second cycle

Advancement level

A1N

Course offered for

  • Master of Science in Mechanical Engineering
  • Master of Science in Design and Product Development
  • Master's Programme in Mechanical Engineering

Prerequisites

Basic courses in Engineering materials and Solid mechanics.

Intended learning outcomes

The intended learning outcomes of the course is to familiarise the student with the material aspects of manufacturing technology. After completed course the student should:

  • Understand the basic physical metallurgy of Steels, Aluminium alloys, Titanium alloys and Nickel-base superalloys.
  • Understand the interaction between processing, microstructure and properties of metallic materials.
  • Understand the possibilities and challenges of different manufacturing techniques from a materials perspective.
  • Be able to select suitable manufacturing method for a specific material.
  • Be able to select suitable material for a specific manufacturing method.
  • Be able to applied this knowledge when communicating and solving industrial problems.

Course content

  • Material aspects on industrial manufacturing processes, like casting, welding, metal forming, forging, metal cutting, and additive manufacturing.
  • Phase diagrams and alloy theory
  • Solidification and diffusion
  • Work-hardening and annealing
  • Steel transformations
  • Precipitation hardening
  • Microstructure and properties of the most common groups of metallic materials; Steel, Cast iron, Aluminium, Titan- and Nickel-based alloys
  • Heat treatments and surface treatments

Teaching and working methods

The course consist of lectures, tutorials, laboratory work and home assignments.

Examination

UPG1Seminar1 creditsU, G
LAB1Laboration course1 creditsU, G
TEN1Written examination4 creditsU, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows: 

  • If teaching language is “Swedish”, the course as a whole could be given in Swedish, or partly in English. Examination language is Swedish, but parts of the examination can be in English.
  • If teaching language is “English”, the course as a whole is taught in English. Examination language is English.
  • If teaching language is “Swedish/English”, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English depending on teaching language.

Other

The course is conducted in such a way that there are equal opportunities with regard to sex, transgender identity or expression, ethnicity, religion or other belief, disability, sexual orientation and age.

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point. 

The course is campus-based at the location specified for the course, unless otherwise stated under “Teaching and working methods”. Please note, in a campus-based course occasional remote sessions could be included.  

Department

Institutionen för ekonomisk och industriell utveckling

Course literature

Other

  • Will be presented on the course LISAM page

Code Name Scope Grading scale
UPG1 Seminar 1 credits U, G
LAB1 Laboration course 1 credits U, G
TEN1 Written examination 4 credits U, 3, 4, 5

Other

Will be presented on the course LISAM page

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
Mathematics basic course, Analysis, Physics, Thermodynamics
1.2 Fundamental engineering knowledge (G1X level)
X
X
UPG1
LAB1
TEN1
Engineering Materials
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
UPG1
LAB1
TEN1
Heat Transfer
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)
X
TEN1
Teaches physical phenomena relevant to manufacturing techniques such as Solidification, Phase transformations, Diffusion and Deformation mechanisms
1.5 Insight into current research and development work
X
Addresses current trends for R&D in materials and manufacturing technology
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
X
UPG1
Ability to analyze the link between material behaviors and manufacturing method
2.2 Experimentation, investigation, and knowledge discovery
X
LAB1
Knowledge of basic material  analysis methods
2.3 System thinking
X
X
UPG1
Be able to account for materials and manufacturing technology in an industrial application and context.
2.4 Attitudes, thought, and learning
X

                            
2.5 Ethics, equity, and other responsibilities
X
Sustainability aspects linked to materials and manufacturing technology
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
X
UPG1
LAB1
Group work in labs and for the home assignment
3.2 Communications
X
X
UPG1
Written and oral presentation of home assignment
3.3 Communication in foreign languages
X
Course literature in English. UPG1 is presented in English.
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context
X
X
UPG1
Takes into account economic and environmental conditions.
4.2 Enterprise and business context
X
Takes economic aspects into account.
4.3 Conceiving, system engineering and management
X
X
UPG1
The home assignment provides the opportunity for an in-depth case study
4.4 Designing

                            
4.5 Implementing
X
X
UPG1
TEN1
Provides conditions for selection of materials and manufacturing method for a specific application.
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development
X
X
UPG1
Takes into account economic and environmental conditions.
5.2 Economic conditions for knowledge development
X

                            
5.3 Identification of needs, structuring and planning of research or development projects
X

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects
X

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.