Research Methods in Management and Engineering, 6 credits
Forskningsmetoder i industriell utveckling, 6 hp
TMQU48
Main field of study
Industrial Engineering and ManagementCourse level
Second cycleCourse type
Programme courseExaminer
Jason MartinDirector of studies or equivalent
Mårten FristedtEducation components
Preliminary scheduled hours: 48 hRecommended self-study hours: 112 h
Course offered for | Semester | Period | Timetable module | Language | Campus | ECV | |
---|---|---|---|---|---|---|---|
6MIND | Industrial Engineering and Management, Master's Programme (Innovation Management) | 2 (Spring 2024) | 1, 2 | -, 1 | English | Linköping, Valla | C |
6MIND | Industrial Engineering and Management, Master's Programme (Operations Management) | 2 (Spring 2024) | 1, 2 | -, 1 | English | Linköping, Valla | C |
6MIND | Industrial Engineering and Management, Master's Programme (Quality Management) | 2 (Spring 2024) | 1, 2 | -, 1 | English | Linköping, Valla | C |
Main field of study
Industrial Engineering and ManagementCourse level
Second cycleAdvancement level
A1NSpecific information
This course can not be included in the same degree as TMQU14.
Course offered for
- Master's Programme in Industrial Engineering and Management
Prerequisites
Admission requirements for Master programme.Intended learning outcomes
The course will provide the students with a foundation in philosophy of science and research methodology before their master thesis work. After completing the course, the student shall be able to:
- Search for articles in scientific databases
- Handle references and quotes in a correct manner
- Assess and discuss ethical questions in research
- Use central terms for discussing the scientific quality of research
- Assess the relevance of different research methods for different types of research
- Assess the quality of scientific articles within the area relevant for the student
- Write a scientific report
Course content
Literature search, classification of research methods, case study methodology, survey methodology, mathematical modeling, simulation, scientific writing, referencing technique, philosophy of science, validity, reliability, ethics.
Teaching and working methods
The course is mainly extracurricular and is mostly self-study based using pre-recorded videos and study material available via the Lisam course portal. Some lectures and seminars (e.g. follow-up seminars and examination seminars) are, however, scheduled live sessions that are held either digitally or physically, as campus based activities.
Examination
UPG2 | Written assignments | 4 credits | U, G |
UPG1 | Active participation in seminars | 2 credits | U, G |
Grades
Two-grade scale, U, GOther information
About teaching and examination language
The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows:
- If teaching language is “Swedish”, the course as a whole could be given in Swedish, or partly in English. Examination language is Swedish, but parts of the examination can be in English.
- If teaching language is “English”, the course as a whole is taught in English. Examination language is English.
- If teaching language is “Swedish/English”, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English depending on teaching language.
Other
The course is conducted in such a way that there are equal opportunities with regard to sex, transgender identity or expression, ethnicity, religion or other belief, disability, sexual orientation and age.
The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.
The course is campus-based at the location specified for the course, unless otherwise stated under “Teaching and working methods”. Please note, in a campus-based course occasional remote sessions could be included.
Department
Institutionen för ekonomisk och industriell utvecklingCourse literature
Regulary literature
Books
- Robinson, S., (2014) Simulation : the practice of model development and use 2 Houndmills
ISBN: 9781137328021, 1137328029
Articles
- Barratt, M., Choi, T.Y., & Li, M. , Qualitative case studies in operations management: Trends, research outcomes and future research implications Journal of Operations Management 29/2011/329-342
- Elg, M., Gremyr, I., Halldórsson, Á., & Wallo, A. , Service action research: review and guidelines Journal of Services Marketing 34/2020/87-99
- Holland, C., Levis, J., Nuggehalli, R., Santilli, B. & Winters, J. , UPS Optimizes Delivery Routes. Interfaces 47/2017/8-23
- Lyons, J. S. F., Bell, P. C. & Begen, M. A. , Solving the Whistler-Blackcomb Mega Day Challenge. Interfaces 48/2018/323-339
- Malhotra, M. K. & Grover, V., An Assessment of Survey Research in POM: From Constructs to Theory Journal of Operations Management 16/1998/407-425
- Martin, J., Elg, M., & Gremyr, I. , Fit for purpose? Exploring competencies in quality management International Journal of Quality and Service Management 11/2020/317-333
- Martin, J., Elg, M., & Gremyr, I. , Towards a quality management competence framework: exploring needed competencies in quality management Total Quality Management and Business Excellence 32/2021/359-378
- Rocco, T.S., & Plakhotnik, M.S. , Literature Reviews, Conceptual Frameworks, and Theoretical Frameworks, Terms, Functions and distinctions, Human Resource Development Review 29/2009/120-130
- Rowley, J., Conducting research interview Management Research Review 35/2012/260-271
- Van de Ven, A.H. & Johnson, P.E. , Knowledge for theory and practice Academy of Management Review 31/2006/802-821
- Voss, C., Tsikriktis, N. & Frohlich, M. , Case research in operations management International Journal of Operations and Production Management 22/2002/195-219
Additional literature
Books
- Bryman, A., (2012) Social research methods Oxford University Press
- Miles, M.B. & Huberman, A.M. , (1994) Qualitative data analysis.: An expanded sourcebook, SAGE Publications
- Van de Ven, A. , (2013) Engaged Scholarship. A Guide for Organizational and Social Research Oxford University Press
Articles
- Larsson, T. & Patriksson, M. , "Subben's checklist" and the assessment of articles in mathematical optimization/operations research: In memoriam of Subhash C. Narula. Computers & Operations Research 71/2016/163-164
Other
- Checklists
Checklists that relate to lectures
Code | Name | Scope | Grading scale |
---|---|---|---|
UPG2 | Written assignments | 4 credits | U, G |
UPG1 | Active participation in seminars | 2 credits | U, G |
Course syllabus
A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Timetabling
Program courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. Single subject courses can be timetabled at other times.
Interruption in and deregistration from a course
The LiU decision, Guidelines concerning confirmation of participation in education, Dnr LiU-2020-02256 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/764582), states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered are therefore obliged to report the interruption so that this can be noted in Ladok. Deregistration from or interrupting a course is carried out using a Web-based form.
Cancelled courses and changes to the course syllabus
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. For single subject courses, the cancellation must be done before students are admitted to the course (in accordance with LiUs regulation Dnr LiU-2022-01200, https://styrdokument.liu.se/Regelsamling/VisaBeslut/622645).
Guidelines relating to examinations and examiners
For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2022-04445 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.
Forms of examination
Principles for examination
Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the faculty programme board.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and January
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination in March and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
Examinations for courses that the faculty programme board has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.
Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
When a course, or a written or oral examination (TEN, DIT, DAT, MUN), is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the faculty programme board. In all cases above, the examination is also offered one more time during the academic year after the following, unless the faculty programme board decides otherwise. In total, 6 re-examinations are offered, of which 2 are regular re-examinations. In the examination registration system, the examinations given for the penultimate time and the last time are denoted.
If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the faculty programme board or boards determine together the scheduling and frequency of re-examination occasions.
For single subject courses, written and oral examinations can be held at other times.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, Dnr LiU-2023-00379 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
Course closure
For Decision on Routines for Administration of the Discontinuation of Educational Programs, Freestanding Courses and Courses in Programs, see Dnr LiU-2021-04782 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/1156410). After a decision on closure and after the end of the discontinuation period, the students are referred to a replacement course (or similar) according to information in the course syllabus or programme syllabus. If a student has passed some part/parts of a closed program course but not all, and there is an at least partially replacing course, an assessment of crediting can be made. Any crediting of course components is made by the examiner.
Registration for examination
In order to take an written, digital or computer-based examination, registration in advance is mandatory, see decision in the university’s rule book Dnr LiU-2020-04559 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682). An unregistered student can thus not be offered a place. The registration is done at the Student Portal or in the LiU-app during the registration period. The registration period opens 30 days before the date of the examination and closes 10 days before the date of the examination. Candidates are informed of the location of the examination by email, four days in advance.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book, Dnr LiU-2020-04559 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
A retake is not possible on courses that are included in an issued degree diploma.
Grades
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5).
- Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.
Examination components
The following examination components and associated module codes are used at the Faculty of Science and Engineering:
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
- Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).
In general, the following applies:
- Mandatory course components must be scored and given a module code.
- Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
- For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.
For mandatory components, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component.
For possibilities to alternative forms of examinations, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it.
- If the coordinator has recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives.
- An examiner may also decide that an adapted examination or alternative form of examination if the examiner assessed that special circumstances prevail, and the examiner assesses that it is possible while maintaing the objectives of the course.
Reporting of examination results
The examination results for a student are reported at the relevant department.
Plagiarism
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at Cheating, deception and plagiarism.
Linköping University has also produced a guide for teachers and students' use of generative AI in education (Dnr LiU-2023-02660). As a student, you are always expected to gain knowledge of what applies to each course (including the degree project). In general, clarity to where and how generative AI has been used is important.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at https://styrdokument.liu.se/Regelsamling/Innehall.
Regulary literature
Books
ISBN: 9781137328021, 1137328029
Articles
Additional literature
Books
Articles
Other
Checklists that relate to lectures
Note: The course matrix might contain more information in Swedish.
I | U | A | Modules | Comment | ||
---|---|---|---|---|---|---|
1. DISCIPLINARY KNOWLEDGE AND REASONING | ||||||
1.1 Knowledge of underlying mathematics and science (G1X level) |
|
X
|
X
|
UPG2
UPG1
|
Used in group tasks, e.g. mathematical modeling |
|
1.2 Fundamental engineering knowledge (G1X level) |
|
X
|
X
|
UPG2
UPG1
|
Needed for analysis of scientific texts |
|
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level) |
|
X
|
X
|
UPG2
UPG1
|
Extended knowledge within a selection of common research methods within management and engineering |
|
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level) |
X
|
X
|
|
UPG2
UPG1
|
Introducing and teaching in research methods |
|
1.5 Insight into current research and development work |
|
X
|
X
|
UPG2
UPG1
|
The course will provide the students with a foundation in philosophy of science and research methodology before their master thesis work and thereby gain insight into current R&D work |
|
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES | ||||||
2.1 Analytical reasoning and problem solving |
|
X
|
X
|
UPG2
UPG1
|
Scientific thinking and problem solution |
|
2.2 Experimentation, investigation, and knowledge discovery |
|
|
|
|||
2.3 System thinking |
|
X
|
X
|
UPG2
|
The students need to position their work in relation to a larger context (e.g. Problem formulation) |
|
2.4 Attitudes, thought, and learning |
X
|
|
|
Research based thinking and approach |
||
2.5 Ethics, equity, and other responsibilities |
X
|
|
|
Introducing research ethics |
||
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION | ||||||
3.1 Teamwork |
|
X
|
X
|
UPG2
UPG1
|
Several group assignments |
|
3.2 Communications |
|
X
|
X
|
UPG2
UPG1
|
Oral presentations |
|
3.3 Communication in foreign languages |
|
X
|
X
|
UPG2
UPG1
|
The course is conducted in English |
|
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT | ||||||
4.1 External, societal, and environmental context |
|
X
|
X
|
UPG2
UPG1
|
Develop and write parts in a report that to relates to social conditions |
|
4.2 Enterprise and business context |
X
|
X
|
X
|
UPG2
UPG1
|
Develop and write parts in a report that to relates to business related conditions |
|
4.3 Conceiving, system engineering and management |
X
|
X
|
X
|
UPG2
UPG1
|
Develop and write parts in a report that produces a conceptual model that is intended for use |
|
4.4 Designing |
|
|
|
|||
4.5 Implementing |
|
|
|
|||
4.6 Operating |
|
|
|
|||
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS | ||||||
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development |
|
|
|
|||
5.2 Economic conditions for knowledge development |
|
|
|
|||
5.3 Identification of needs, structuring and planning of research or development projects |
X
|
X
|
|
UPG2
UPG1
|
Introduction and teaching in identifying research needs and how to plan research- and development projects. |
|
5.4 Execution of research or development projects |
X
|
|
|
Introduction and teaching in how to conduct research and development projects. |
||
5.5 Presentation and evaluation of research or development projects |
X
|
X
|
X
|
UPG2
UPG1
|
Both written and oral presentation. Introducing and teaching in research quality criteria and they can be applied. |
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.
There are no files available for this course.