Modelling and Animation, 6 credits

Modellering och animering, 6 hp

TNM079

Main field of study

Computer Science and Engineering Media Technology and Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Mark E Dieckmann

Director of studies or equivalent

Camilla Forsell

Education components

Preliminary scheduled hours: 48 h
Recommended self-study hours: 112 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CYYY Applied Physics and Electrical Engineering, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CDDD Computer Science and Engineering, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CDDD Computer Science and Engineering, M Sc in Engineering (Computer Games Programming) 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CMJU Computer Science and Software Engineering, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (Computer Games Programming) 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6MICS Computer Science, Master's Programme 2 (Spring 2018) 2 2 English Norrköping, Norrköping E
6MDAV Computer Science, Master's Programme 2 (Spring 2018) 2 2 English Norrköping, Norrköping E
6MICS Computer Science, Master's Programme (Visualization and Computer Graphics) 2 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CITE Information Technology, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CITE Information Technology, M Sc in Engineering (Computer Games Programming) 8 (Spring 2018) 2 2 English Norrköping, Norrköping E
6CMEN Media Technology and Engineering, M Sc in Engineering 8 (Spring 2018) 2 2 English Norrköping, Norrköping E

Main field of study

Computer Science and Engineering, Media Technology and Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Media Technology and Engineering, M Sc in Engineering
  • Applied Physics and Electrical Engineering - International, M Sc in Engineering
  • Applied Physics and Electrical Engineering, M Sc in Engineering
  • Computer Science, Master's Programme
  • Computer Science and Engineering, M Sc in Engineering
  • Information Technology, M Sc in Engineering
  • Computer Science and Software Engineering, M Sc in Engineering

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

Computer Graphics, Linear Algebra, Calculus in several variables, Programming

Intended learning outcomes

The aim of the course is to give the students knowledge of current and advanced methods in computer graphics for modeling and animation of virtual objects. After completing the course the student shall be able to:

  • understand and evaluate different mathematical representations of surfaces in 3D
  • describe and implement alternative data structures and decimation methods for polygon meshes
  • describe and implement 3D models using subdivision surfaces and implicitly defined surfaces
  • understand the principles and methods of modelling using level-sets
  • describe and implement the principles and methods used in simulation and animation of fluids

    Course content

    Representations of surfaces in 3D. Triangular meshes in modeling. Mesh decimation. Implicit modeling. The level-set method in computer graphics and modeling. Splines and subdivision surfaces. Physics based simulation and animation of fluids.

    Teaching and working methods

    The course starts with a series of lectures, providing an overview and presenting the theory in the field. The lecture material is accompanied by a set of laboratory exercises to demonstrate the theory in action. At the end of the course a written exam is given. To complete the course, students must have passed the lab exercises and the written exam. Grades are based both on the lab exercises and the written exam.

    Examination

    LAB4Laboratory work4 creditsU, 3, 4, 5
    TEN3Written examination2 creditsU, 3, 4, 5

    Grades

    Four-grade scale, LiU, U, 3, 4, 5

    Department

    Institutionen för teknik och naturvetenskap

    Director of Studies or equivalent

    Camilla Forsell

    Examiner

    Mark E Dieckmann

    Education components

    Preliminary scheduled hours: 48 h
    Recommended self-study hours: 112 h

    Course literature

    Föreläsningsanteckningar och material inför varje praktisk uppgift utgör basen för kurslitteraturen. Därtill refereras relevanta forskningsartiklar inom området. Sådant kompletterande material ges ut av institutionen.
Code Name Scope Grading scale
LAB4 Laboratory work 4 credits U, 3, 4, 5
TEN3 Written examination 2 credits U, 3, 4, 5

Course syllabus

A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Regulations relating to examinations and examiners 

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

  • Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
  • Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
  • If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
  • If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
  3. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  4. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Föreläsningsanteckningar och material inför varje praktisk uppgift utgör basen för kurslitteraturen. Därtill refereras relevanta forskningsartiklar inom området. Sådant kompletterande material ges ut av institutionen.

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X

                            
1.2 Fundamental engineering knowledge (G1X level)
X

                            
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
LAB4
TEN3

                            
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
LAB4

                            
2.2 Experimentation, investigation, and knowledge discovery

                            
2.3 System thinking
X

                            
2.4 Attitudes, thought, and learning
X

                            
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork

                            
3.2 Communications

                            
3.3 Communication in foreign languages

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management

                            
4.4 Designing

                            
4.5 Implementing
X
X
LAB4

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects
X

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.