Master's Programme in Intelligent Transport Systems and Logistics, 120 credits
Masterprogram i intelligenta transportsystem och logistik, 120 hp
Master of Science in Transportation Systems Engineering, 120 credits
Pace of studyFull-time
- An MSc in Intelligent Transport Systems and Logistics from Linköping University works with the design, planning and management of transport and logistics systems and is able to identify, analyse, solve and communicate complex interdisciplinary problems in industry and society.
- The master’s programme in Intelligent Transport Systems and Logistics will become one of the leading international master's programmes in the field. The courses in the programme shall be on a level comparable to similar courses provided within other relevant, excellent international education programmes.
- The master’s programme in Intelligent Transport Systems and Logistics will be the obvious choice for students who have a Bachelor in of Science or Engineering degree and who have the ambition to increase and deepen their knowledge in transportation systems engineering.
After the completion of the master's programme the student is expected to have acquired the following knowledge and skills:
Disciplinary knowledge and reasoning
An MSc in Intelligent Transport Systems and Logistics from Linköping University have well-founded theoretical and practical knowledge and excellent technical and managerial skills related to the field transport and logistics systems and is able to apply a multidisciplinary system approach to the development of these complex systems. The student:
- has a broad knowledge of intelligent transport systems as well as specialized knowledge related to traffic systems and logistics systems
- is able to effectively use computerised tools for modelling, analysis and visualization of transportation systems engineering problems
- has knowledge about the relevant communication technology in the field of transportation
Students with a Bachelor’s of Science or Engineering degree entering the programme have already studied in-depth courses within a certain engineering discipline, e.g. systems engineering, electrical engineering, software engineering or industrial engineering, including at least 22 ECTS credits in mathematics and applied mathematics. In the master’s programme there is a possibility to deepen the general engineering skills in optimization, geographical information systems, mobile telecommunication and computer networks. Consequently, an MSc in Intelligent Transport Systems and Logistics is able to describe, formulate, and analyse industrial and societal problems by using mathematical tools and technological applications.
The master's programme focuses on planning and management of both traffic systems and logistics system, and on mathematical modelling of these systems using optimization and simulation techniques. The programme also contains traffic safety management and project management. An MSc in Intelligent Transport Systems and Logistics is able to:
- analyse complex problems based on relevant theory and practical knowledge
- relate and synthesize different theoretical perspectives and develop their own models of analysis
- apply academic principles, models and methodologies in industrial firms
- critically assess methods, procedures and practices that are applied in technology-based firms
Current research and new research results are integrated into courses at the end of the programme, including a project course where the students apply previous knowledge in a structured and methodical way, from problem description - via specification and planning - to analysis and solution of communication and transport systems challenges, thus gaining in-depth practical understanding and experience.
Personal and professional skills and attributes
An MSc in Intelligent Transport Systems and Logistics has the individual and professional capability and attitude to take a leading role in dynamic industrial environments, and is able to identify, formulate and examine complex engineering problems in a systematic way. By using relevant literature and performing quantitative studies, an MSc in Intelligent Transport Systems and Logistics readily adopts new knowledge.
An MSc in Intelligent Transport Systems and Logistics is able to identify, analyse and develop complex systems by defining the system’s boundaries and properties, considering the whole system as well as subsystems and describing and examining the interaction between the different parts in the system including its important context variables. The students are trained to take initiatives, work independently, creatively and to apply critical thinking. Self-knowledge and a will to develop personally throughout life are important, and so is planning of time and resources in an efficient and effective way, taking responsibility, being reliable and acting professionally. This includes being active in career planning and keeping up to date with the profession’s current developments.
Interpersonal skills, teamwork, and communication
An MSc in Intelligent Transport Systems and Logistics is trained to collaboratively work on complex tasks. Interpersonal skills, teamwork and communication are therefore of utmost importance. The students are trained to work together with other people in projects and groups. This includes contributing to group effectiveness by actively taking part, creating clear roles and responsibilities, actively sharing knowledge and collaboratively achieving goals. An MSc in Intelligent Transport Systems and Logistics can start, plan, manage and lead different types of projects and integrate the work of people from different specializations.
Furthermore, an MSc in Intelligent Transport Systems and Logistics is able to communicate, orally and in writing, in a correct, inspiring way orientated towards achieving goals. Effective communication is comprised of both task-related and relationship-oriented skills. As the programme is given in English, an MSc in Intelligent Transport Systems and Logistics is proficient enough in English to take into account the state-of-the art knowledge within the field and, based on this knowledge, understand, analyse, compare, and reflect on complex engineering problems, in written text and orally.
Planning, execution and presentation of research or development projects with respect to scientific and societal needs and requirements
An MSc in Intelligent Transport Systems and Logistics has knowledge about suitable development processes for different kinds of research or development projects and is able to participate and actively contribute to all phases of research or development projects, including identification of needs, structuring, planning, execution and presentation of projects, taking into account the importance of technology in society, including economic, social, and sustainable development.
The programme starts with one semester of compulsory courses. Semesters two and three include specialisation and possibilities for diversification depending on the interest of the student. The programme concludes with a master’s thesis of 30hp in semester four.
- Bachelor's degree with a major in an engineering subject, or equivalent. The Bachelor's degree (equivalent to a Swedish Kandidatexamen) shall be from an internationally recognised university.
- 22 ECTS credits in mathematics/applied mathematics and/or application of mathematics relevant for the programme, including courses in linear algebra, calculus and mathematical statistics.
- English corresponding to the level of English in Swedish upper secondary education (English 6/B). This is normally attested by means of an internationally recognised test.
(Exemption from Swedish)
Selection for the January application round is based on merit rating (grade tariff) at three levels. If necessary, applicants within the same merit group will be selected by lot.
- Group 1: High
- Group 2: Good
- Group 3: Low
The thesis should be based on high-quality scientific content and carried out in close contact with the research groups involved in the programme. The thesis should be written and presented in English. The main field of study for the thesis work should be Transportation Systems Engineering.
To be qualified to conduct a degree project, the student must be admitted to the master’s programme and have completed at least 60 credits from courses within the programme, of which 30 credits must be at the advanced (graduate) level within the main field of study.
- All compulsory courses in the programme completed.
- Elective courses from the curriculum completed so that 120 ECTS credits is reached.
- At least 90 ECTS courses on advanced level, including master’s thesis (30 ECTS), where 60 ECTS (master’s thesis and courses) are in the main field of study Transportation Systems Engineering.
- Master’s thesis (30 ECTS) on advanced level, in the main field of study Transportation Systems Engineering, examined at the Faculty of Science and Engineering at Linköping University.
Courses with overlapping content are not allowed to be included in the degree. Courses included in the Bachelor's degree can never be included in the Master's degree.
Degree in Swedish
Teknologie masterexamen i Transportsystem, 120 hp
Degree in English
Master of Science in Transportation Systems Engineering, 120 credits
See the Common rules tab regarding eligibility, admission, leave, postponement, study break or admission to latter part of the programme.
Semester 1 Autumn 2021
Semester 2 Spring 2022
Semester 3 Autumn 2022
Semester 4 Spring 2023
|Course code||Course name||Credits||Level||Timetable module||ECV|
|TQXX30||Degree project - Master’s Thesis||30*||A1X||-||C||
*The course is divided into several semesters and/or periods
|TQXX30||Degree project - Master’s Thesis||30*||A1X||-||C||
*The course is divided into several semesters and/or periods
Structure and organisation of study programmes
The contents and design of the programmes are to be continuously revised such that new knowledge is integrated into courses and specialisations. Within one programme, several study specialisations or profiles may be available. The identities of the study specialisations or profiles and the regulations governing how these may be selected are given in the syllabus and curriculum for the particular field of study and programmes.
The structure and organisation of the programmes are to follow specified criteria that are summarised in the syllabus for each programme.
- The syllabus defines the aims of the study programme.
- The curriculum, which constitutes one part of the syllabus for the field of study, gives details of the terms in which the various courses have been timetabled, and their scheduling through the academic year.
- The course syllabus specifies, among other things, the aim and contents of the course, and the prior knowledge that a student must have, in addition to the admission requirements for the programme, in order to be able to benefit from the course.
The qualification requirements specified in the Higher Education Ordinance 2007 apply to students admitted after 1 July 2007. A student who has completed components of a programme after 1 July 2007 has the right to be assessed with respect to the qualification requirements specified by the Higher Education Ordinance 2007. In addition, local regulations laid down by the faculty boards and university board apply, see http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Examina.
Higher Education Act Chapter 1, Section 8:
First-cycle courses and study programmes are to develop:
- the ability to make independent and critical assessments
- the ability to identify, formulate and solve problems autonomously, and
- the preparedness to deal with changes in working life.
In addition to knowledge and skills in their field of study, students shall develop the ability to:
- gather and interpret information at a scholarly level
- stay abreast of the development of knowledge, and
- communicate their knowledge to others, including those who lack specialist knowledge in the field.
Qualifications within a study programme
Qualification requirements that are specific to a study programme are given in the syllabus for that programme.
Admission requirements and matriculation and postponement of matriculation
A person who has been accepted for a study programme is to start their studies (matriculate) in the term that is specified in the decision about admission. The date and location of the compulsory matriculation procedure will be communicated to those admitted to the first term of the programme.
Regulations concerning admission requirements, matriculation and postponement of matriculation have been laid down in the admission regulations for Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622645.
Admission to a later part of a programme
Admission to a part of a study programme is used here to refer to admission with the purpose of completing the programme and taking a degree. Admission to a later part of a programme may take place only if sufficient resources and space on the programme are available. Furthermore, the applicant must satisfy the entry requirements for the relevant term of the programme, as specified in http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Tekniska_fakulteten.
Interruption in studies
Notification of an interruption in studies is to be made through a web form, https://www.lith.liu.se/for-studenter/anmalan-studieuppehall?l=en. If such a notification is not made and if the student does not do a course registration during the first term during which the interruption is to take place, the interruption will be considered to be a withdrawal. An interruption in studies must cover a complete term, and notification of interruptions can be given for a maximum of two consecutive terms. Notification of resumption of studies is to take place at the course registration for the term that follows the interruption.
A student who is taking an interruption in studies may during this period retake examinations. The student is responsible that registration for courses is carried out at the correct times in preparation for the resumption of studies.
Withdrawal from a study programme
A student who wishes to withdraw from a study programme must notify the study guidance counsellor. A student who leaves the studies without giving notification of an interruption in study and who fails to register on a course for the immediately subsequent term is considered to have withdrawn. A student who has withdrawn may return to the study programme if a vacancy is available that is not required for students returning after an interruption in study, and not required for students who are changing their location of study and/or study programme.
Courses within a study programme
The curriculum for the various years of a study programme specify which courses are mandatory (m), elective (e) and voluntary (v). If a student wishes to study a different combination than the one specified in the curriculum, an application must be made to the board of studies.
The course specified as voluntary (labelled with “v”) in the programme syllabus are assessed solely as voluntary courses, and credits from these may not contribute to the requirements for a degree.
Courses from another study programme or third-cycle courses
To include courses in a degree from another study programme or third-cycle courses, the student need to apply to and be granted this from the board of studies. If such a decision is not taken, such courses are regarded as voluntary courses.
When selecting a course from another programme, the admission requirements specified in the course syllabus must be satisfied.
Admission is granted to the extent that resources allow, provided that places are available on the course.
Admission to third-cycle courses requires studies at Master's level, i.e. year 4-5 or admitted to a Master's programme. Information can be obtained from the relevant director of advanced studies.
Students taking a master’s programme in engineering
Students taking a master’s programme in engineering can apply to take courses given in Term 7 and later terms of the programme from all engineering master’s programmes. Admission to courses at Term 7 or higher requires the possession of at least 150 credits within the programme to which the student has been admitted.
Students taking a Bachelor of Science (Engineering)
Students taking Bachelor of Science (Engineering) degrees may apply to take courses specified in the programme syllabuses of all Bachelor of Science (Engineering) programmes.
Students taking a Bachelor of Science
Students taking Bachelor of Science degrees may apply to take courses specified in the programme syllabuses of all Bachelor of Science programmes.
Single-subject courses, courses from other faculties, or other Higher Education Institutions
To include single-subject courses, courses from another faculty, or courses from other Higher Education Institutions in a degree, the student need to apply to and be granted this from the board of studies.
Registration for programme courses
Registration for courses that are given as part of a study programme must be made during the specified period, which has been preliminarily set to 1-10 April for the autumn term, and 1-10 October for the spring term. Information about course registration is published on the Study councellors webpages or in programme rooms, sent to students by email, and disseminated at scheduled information meetings.
Registration for programme courses as single-subject courses
Admission to a programme course as a single-subject subject course may take place only if sufficient resources and space on the course are available. Furthermore, the applicant must satisfy the entry requirements for the relevant course.
In the event of a scarcity of resources, the board of LiTH can decide to limit the possibilities of taking courses that are part of a programme as freestanding courses.
Students who require support in planning their continued studies can contact the study guidance counsellor of the programme. Study planning involves the student and the study guidance counsellor together drawing up an individual plan for studies during the subsequent term. The individual plan may allow the student to deviate from the general curriculum.
Completed first-cycle courses are a precondition for successful studies at more advanced levels. For this reason, study planning is based on giving priority to courses from earlier years of study that have not been completed. If further capacity is available, new courses may be taken.
Study planning takes place on a regular basis if the student:
- does not satisfy the requirements for progression to later terms. In order for a student to be able to participate in courses from later years in such cases, a decision of exemption is required.
- does not satisfy the requirements for starting a degree project.
Other situations in which study planning may be required:
- A student has fallen behind during the early part of a study programme and has failed to complete several courses.
- A student has not satisfied the entry requirements for a degree project before term 6 of an engineering degree.
- A student has applied for admission to a later part of a programme.
- Studies have been carried out abroad.
- A study programme is to be resumed after an interruption.
In these cases the study guidance counsellor supports the student in planning the continued studies, also in situations in which the student can register for the relevant courses without the need for a special decision for the continued studies.
Part of education abroad
Students can exchange study at LiTH for study at an institute of higher education abroad, and/or work on a degree project abroad.
In the event that study (courses) at LiTH are exchanged for study abroad, the faculty programme director is responsible for a decision about a preliminary individual study plan, which is to be drawn up in advance. After the exchange, the student apply to credit completed courses from the exchange into their degree. The guideline for credit assessment in an exchange is that the courses should be in line with the program's orientation.
Regulations for entry requirements, ranking and nomination for study abroad through LiTH’s exchange agreements and for the compulsory study abroad period within Ii (Industrial Engineering and Management – International) and Yi (Applied Physics and Electrical Engineering – International) can be found at: http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Tekniska_fakulteten.
A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module.
Interrupting a course
The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en.
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus.
Guidelines relating to examinations and examiners
For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2019-00920 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2017-03931 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.
Forms of examination
Principles for examination
Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and October
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination in March and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.
Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.
If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.
Registration for examination
Until January 31 2021, the following applies according to previous guidelines: In order to take an written, digital or computer-based examination student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.
From February 1 2021, new guidelines applies for registration for written, digital or computer-based examination, Dnr LiU-2020-02033 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).
Symbols used in the examination registration system:
** denotes that the examination is being given for the penultimate time.
* denotes that the examination is being given for the last time.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
A retake is not possible on courses that are included in an issued degree diploma.
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5).
- Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.
The following examination components and associated module codes are used at the Faculty of Science and Engineering:
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
- Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).
In general, the following applies:
- Mandatory course components must be scored and given a module code.
- Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
- For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.
For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
Reporting of examination results
The examination results for a student are reported at the relevant department.
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva.
Degree project for Master’s Degree in Engineering 300 credits, Master of Science (Two years), Master of Philosophy (Two years), Master of Science (One year), and master’s degrees without prefix
General provisions for the degree project are given here. A specific board of studies may have supplementary regulations that are specific for a study programme. These are specified, where relevant, in the syllabus for the field of education and/or the degree project. Information and links to course syllabuses, registration, reflection documents, etc. can be found at https://www.lith.liu.se/examensarbete/examensarbete?l=en.
To be awarded a Master’s Degree in Engineering 300 credits, Master of Science (Two years), Master of Philosophy (Two years), Master of Science (One year), or master’s degree without prefix a student must carry out an approved degree project. The components of the degree project are described in the relevant course syllabus.
The aim of the degree project is described in the relevant course syllabus, https://www.lith.liu.se/examensarbete/examensarbete?l=en. Links to respective course syllabus can be found under the respective headings Master's programme, Civilingenjörsutbildning (only in Swedish), Högskoleingenjörsutbildning (only in Swedish), Kandidatutbildning (only in Swedish).
Requirements for the extent of the degree project for each type of degree are given in the syllabus of the study programme.
Locations for a degree project
The work is carried out in the form of:
- an internal degree project located at one of the participating departments at LiU
- an external degree project located at a company, government agency, or other organisation in Sweden or abroad, that an examiner has assessed is able to manage a degree project that satisfies the requirements, or
- a degree project within an exchange agreement in association with study abroad, whereby all study results are to be credited to the student by the relevant board of studies.
The main subject areas that are permitted within each study programme are described in the programme syllabus. Any individual subjects that may be relevant to the main subject area are to be determined by the relevant board of studies.
The examiner for a degree project within a certain subject area are determined by the board of studies that is responsible for general degrees within the main subject area. An up-to-date list is given at https://www.lith.liu.se/examensarbete/examensarbete?l=en.
Degree projects within agreements relating to study abroad
During study abroad that takes place within the framework of an agreement, the provisions of the host institute relating to degree projects are applied. The student is to consult the board of studies and together ensure that the proposed degree project is carried out in a main subject area that is permitted within the study programme. Approved main subject areas for degree projects are specified in the syllabus for the relevant programme.
A certificate confirming that the degree project has been approved and a copy of the degree project thesis (in PDF format) are to be submitted to the relevant board of studies.
Selection of degree project
A degree project is to be selected in consultation with an examiner, who is also responsible that the specialisation, extent and level of the project satisfy the requirements specified in the course syllabus.
In cases in which issues relating to work-related copyright, patenting or remuneration may arise, provisions governing these should be established in advance. A student working on a degree project may sign a confidentiality agreement in order to obtain access to confidential information necessary for the degree project. The supervisor and examiner, however, determine whether they are prepared to sign a confidentiality agreement, and thus the confidential information must not normally be of such nature that it is necessary to supervise or grade the work. The complete degree project thesis is to be published during the grading procedure, unless special circumstances prevent this. If any part of the thesis should not be published, this must be approved in advance by the examiner and the relevant head of department. Note that final decisions relating to confidentiality are taken by an administrative court.
Commencement of a degree project
Requirements that must be satisfied before a degree project can be started are given in the currently valid course syllabus, which can be obtained in the relevant programme syllabus at https://liu.se/studieinfo/en.
Notification of a degree project is to be carried out when the degree project starts, at https://www.lith.liu.se/for-studenter/anmalan-till-exjobb?l=en. Registration of the degree project is to take place before work commences.
Before the start of the degree project, the examiner is to ensure that the student satisfies the conditions for commencement of the degree project within the relevant main subject area. Support in this can be obtained from the study guidance counsellor, who checks the general requirements for starting the degree project.
The student is also to notify the relevant department of the start of the degree project.
Degree projects in collaboration with another student
In cases in which two students carry out a degree project together, the contribution of each student is to be specified. The extent of the work is to correspond to the extent of two individual projects. The examiner is to ensure that each student has contributed in a satisfactory manner to the work, and that each student satisfies the requirements for achieving a Pass grade for the degree project.
Degree projects carried out in collaboration between more than two students are not permitted.
The examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). The following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. The examiner must also have the expertise required to examine degree projects within the relevant main subject area, and be appointed by the board of studies. The board of studies can also appoint emerita/emeritus as examiner for a single thesis work.
The examiner is to:
- ensure before the start of the degree project that the student satisfies the conditions for commencement of the degree project within the relevant main subject area. The study guidance counsellor is to check whether the commencement criteria are satisfied and inform the examiner of this
- check whether special admission requirements (where relevant) are satisfied, for example that the student can demonstrate a certain degree of in-depth knowledge within the field relevant for the degree project
- determine the specialisation and principal work of the degree project, based on an assessment of whether the degree project will result in the learning outcomes of the course syllabus being satisfied
- pass/fail the planning report
- pass/fail the mid-way assessment
- be responsible that the supervisor or supervisors carry out their duties
- in conjunction with the planning report, check that the student has registered for the degree project
- approve the work for presentation
- before the presentation, check that the proposed opponent satisfies the conditions for commencement of the degree project and has attended three thesis presentations
- pass/fail the presentation and the opposition to it
- approve a concluding reflection document
- ensure that a degree project that has been passed satisfies the learning outcomes of the course syllabus and other requirements, and award a grade to the degree project (either G = Pass, or U = Fail).
In cases in which a degree project is carried out jointly by two students with different main subject areas, one examiner in each main subject area must be appointed, where this is necessary.
A student working on a degree project is to have access to an internal supervisor at the department at which the degree project has been registered. The internal supervisor is to have a degree that corresponds at least to the level of the degree project to be supervised. The internal supervisor may, in exceptional circumstances, be the same individual as the examiner. A decision of whether to allow this in a particular case is to be made by the relevant board of studies before the degree project is started.
The supervisor is to ensure that the student obtains help with:
- expert support in general questions related to methods, specialist knowledge of the subject, and writing the thesis
- problem formulation, and setting the limits of the work
- scheduling and planning work, and selection of appropriate methods.
If the degree project is being carried out outside of LiTH, an external supervisor from the commissioner is to be appointed.
During the first weeks of the degree project, the student is to draw up a planning report that contains:
- a preliminary title of the degree project
- a preliminary statement of the research question, against the background of a literature search
- a preliminary description of the approach to be taken
- planned literature foundation
- a schedule for the execution of the degree project, including suggested dates for the mid-way assessment and presentation.
Formulation of the research question is to be bounded, realistic and viewed from a perspective of societal or commercial benefit. The term “societal” is to be understood here to include universities and university colleges.
Approximately half-way through the degree project, the student is to describe to the examiner at a mid-way assessment how the work is progressing relative to the planning report. The supervisor should also participate. The form of the mid-way assessment may be anything from an oral presentation to a public seminar. The conclusion of the mid-way assessment may be one of three possibilities:
- The work has been carried out essentially as planned, and can continue as planned. The mid-way assessment has been passed.
- The work has been carried out with certain deviations from the planning report. It is, however, believed that it will be possible to complete the work with minor adjustments to the formulation of the research question, approach and/or schedule. The mid-way assessment has been passed.
- The work has deviated from the planning report in a significant manner, and there is a risk that a Pass grade cannot be given. The mid-way assessment has been failed. A new planning report must be drawn up and a new mid-way assessment carried out.
Both oral and written reports of the degree project are to be made, in Swedish or English. For the international Master's programmes, both the oral and written examination should be made in English. The board of studies can allow the reporting to be carried out in another language than Swedish or English.
The oral presentation is to take place in public, unless there are special grounds that this should not be done. The written report is to be in the form of a professionally produced degree project thesis. The presentation and thesis are to follow the instructions given below.
The oral presentation is to take place when the examiner considers that the work has been completed and is ready to be presented. The presentation is to take place at LiTH at a time when other students can attend. This means that the presentation can take place on a date that the student has agreed with the examiner, normally between the re-examination period in August and midsummer, and after the student has attended three thesis presentations.
The oral presentation is to describe the background to the problem that has been studied, describe the methods used, and present the results and conclusions. The presentation is to be at a level suitable for everyone present, not just for specialists. After the oral presentation, the student is to counter any criticism that the opponent may raise, and allow other participants to pose questions. The presentation and the opposition are to be approved by the examiner. When any required adjustments of the thesis have been made, the reflection document has been approved, and the student has functioned as an opponent for another degree project, the degree project is reported as a passed course and the credits can be used to satisfy the requirements for a qualification.
Degree project thesis
The written degree project report is to be professionally written and comprehensive, and it is to demonstrate a scientific approach. The report must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc., of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as undergraduate work, project reports, etc. (This is sometimes known as “self-plagiarism”.) A failure to specify such sources may be regarded as attempted deception during examination.
The contents are to be easy to understand, and the way in which material is presented is important. It must describe the background to the project and the formulation of the research question. The choice of approach is to be clearly explained, and the thesis should make clear the coupling between the results and the conclusions. Commonly accepted scientific methods are to be used for processing the results. The discussion is to be comprehensive, and demonstrate that the student masters analytical thought processes. The thesis is to demonstrate good mastery of the literature in the field, and include an abstract. Theses that are principally written in Swedish should contain a summary in English. A publication-ready manuscript and a reflection document covering the work undertaken are to be submitted to the examiner within 10 days after the oral presentation. The examiner may grant an exemption from this requirement. If final versions of the required documents are not submitted as stipulated, the examiner may determine that the presentation is to be rescheduled.
The Faculty of Science and Engineering (Institute of Technology) at Linköping University recommends that degree project theses be published.
An oral opposition is to be carried out either before or after the student presents his or her thesis. The opponent must satisfy the same requirements for the number and level of credits gained as those of the student’s degree project. The opponent must also have attended three thesis presentations as a member of the audience. Acting as an opponent during the thesis presentation of another student is subject to points-based assessment as described in the course syllabus.
The opponent is to:
- discuss and comment on the selection of methods, results and (where relevant) data processing, conclusions, possible alternative solutions and conclusions, and the management of literature
- comment on the general arrangement of the degree project thesis and related, formal aspects of style, and comment on the oral presentation technique
- illuminate the strengths and weaknesses of the thesis.
The duration of the opposition should be approximately the same as that of the presentation, and it is to include a discussion in which the student presenting the thesis replies to and comments on the criticism raised by the opponent.
Unless otherwise agreed, at least one week before the presentation the opponent is to present in writing to the examiner the important issues that will be discussed, and the structure of the opposition that will be taken. The opponent and the examiner discuss the structure that the opponent has drawn up.
In a normal case, the number of opponents will be the same as the number of respondents. In exceptional cases, the examiner may decide that this is not to be the case.
Attendance at presentations
A student is to attend presentations of degree project theses as described in the course syllabus. The presentations attended must be at the same level or a higher level than the degree project of the student.
It is advantageous that one of the presentations attended is a licenciate degree seminar or a doctoral disputation. The student is responsible for ensuring that a certification of attendance at the presentation is obtained and passed to the departmental administrator for registration in Ladok. Attendance at such presentations is a component of the degree work that is subject to points-based assessment.
The occasions on which a student attends presentations are to be completed before the student presents the degree project thesis. The course syllabus for the degree project describes the scheduling of the attendance at presentations.
A document reflecting on the work that has been carried out is to be submitted to the examiner within 10 working days of the oral presentation. Instructions for preparing a reflection document can be reached through https://www.lith.liu.se/examensarbete/reflektionsdokument?l=en.
The degree project is graded as either Pass or Fail. In order for a student to obtain a pass grade for the degree project, all components must be completed and be awarded a pass grade.
Right to obtain supervision
It is expected that the student complete and pass a degree project within specified time limits. The department is required to provide supervision for a maximum of 18 months after the student has registered the degree project in Ladok. The examiner may grant additional supervision after this period in special cases. If the examiner determines that supervision is to be ended, the degree project is to be awarded a Fail grade. The examiner does not have to fail the degree project if it is considered possible that the student can finish the thesis without further supervision.
If the degree project is awarded a Fail grade for the reason described above or for any other reason, the student is to be directed towards carrying out a further degree project.
The relevant board of studies has overall responsibility for the quality of study programmes. This responsibility covers also degree projects. Quality assurance is to be carried out as determined by the faculty board.
If special circumstances apply, a board of studies may grant exemptions from the regulations specified above. The oral opposition, for example, may be replaced by an extensive written opposition, if the board of studies approves this
- for international students for whom special circumstances apply
- for other students for whom all other components of the qualification have been satisfied, the degree project thesis has been submitted, and special circumstances apply.
Written opposition may be carried out in one of the following ways:
- The student presents a written opposition to a degree project thesis that has been written by another student, whose examiner subsequently examines the opposition.
- The student’s examiner requests that the student prepare a written opposition to a degree project thesis that has previously been examined by an examiner.
If written opposition is used, it is not necessary that the student prepare an introductory statement describing the structure.
The examiner applies to the board of studies for exemption regarding written opposition. The board of studies must approve that opposition may take place in written form, before it is carried out.