Project Course in Applied Physics, CDIO, 12 credits
Projektkurs i teknisk fysik, CDIO, 12 hp
TFYA99
Main field of study
Applied Physics PhysicsCourse level
Second cycleCourse type
Programme courseExaminer
Rickard ArmientoDirector of studies or equivalent
Magnus BomanEducation components
Preliminary scheduled hours: 56 hRecommended self-study hours: 264 h
Available for exchange students
YesMain field of study
Applied Physics, PhysicsCourse level
Second cycleAdvancement level
A1FSpecific information
The Entrepreneurship part overlap with other CDIO courses and cannot be included more than once in a degree.
Exchange students may apply for the course after arrival to LiTH but before it starts. The Faculty coordinators for exchange studies must be contacted before applying.
The course cannot be included in the same degree as TFYA92.
Course offered for
- Master of Science in Biomedical Engineering
- Master of Science in Applied Physics and Electrical Engineering
- Master of Science in Applied Physics and Electrical Engineering - International
- Master's Programme in Materials Physics for Nano and Quantum Technology
Prerequisites
Knowledge in Physics, corresponding to mandatory courses on the programmes Applied Physics and Electrical Engineering, Biomedical Engineering, or Materials Science and Nanotechnology. For sensor-based and experimental-oriented projects, desirable prior knowledge is on sensor and measurement technology, sensor systems, software for data analysis, and basics on electronics. For simulation-based and theory-oriented projects, recommended prior knowledge is on programming and computational physics.
Intended learning outcomes
The course aims to give students an insight into the real engineering world in a multidisciplinary way by means of a project in applied physics that shall lead to the development of a practical product, prototype, or software with large innovation and application possibilities.
During the course, the students will develop and consolidate engineering knowledge, competence, and skills as well as the basics of project management, working as a team in an industry-like environment, using the CDIO concept.
After completing the course, the students should be able to:
- analyze and structure engineering problems in the field of applied physics
- carry out relevant literature search and implement the findings in the design of the project
- write and follow-up technical documentation
- actively contribute to the project through team work
- apply knowledge and methods from previous courses
- independently acquire new knowledge and methods
- critically examine and demonstrate project proposals and solutions
- present results in writing and orally in a manner consistent with modern engineering projects.
The course also aims at the acquisition of knowledge and abilities within the general area of entrepreneurship, with particular focus on business planning for new ventures.
After completing this part of the course, the students should be able to:
- account for models that describe what it takes for a new venture to have a stable basis for further development and to assess the level of development of ventures using such models
- account for the information and analyses needed to evaluate a development project from a business point of view and have the ability to collect and analyze relevant information for the purpose.
Course content
The project course serves as an umbrella for a variety of projects in the main field of study of Applied Physics. Projects may be either experiment- or theory-oriented, and application focused. The specific projects may vary from year to year. Examples of project topics are sensor systems, computational physics, materials science, medical technology, and quantum technology. For information about current projects, see Studieinfo and the tab ‘Additional documents’. Within the course, the students will have the possibility to get new knowledge as well as apply prior knowledge for advanced applications of scientific and industrial relevance.
A number of project specific, introductory lectures, workshops, and/or laboratory work in the beginning gives basic knowledge for the project work. Lectures cover the background, methods, market needs and demands, and theoretical knowledge necessary for the project. Exercises and practical activities are offered to complement the lectures.
The course includes a common entrepreneurship part as well as lectures on the CDIO initiative and, for respective project, the project model that is used.
Teaching and working methods
Before the start of the course, the students choose one of the offered projects. The project group shall consist of at least four students. Each group is assigned a supervisor to support its work. Before the project work is started, the project group shall negotiate a requirement specification with the customer, and write a project plan and a time plan for the project. The course follows the "Conceive Design Implement Operate" (CDIO) program at LiU and adopts an application-relevant project model, e.g., the "Linköping Interactive Project Steering" (LIPS) model.
Examination
UPG1 | Entrepreneurship assignments | 3 credits | U, G |
PRA1 | Group work assignment | 9 credits | U, G |
Details about the written and oral assignments will be provided during the course.
Grades are given as ‘Fail’ or ‘Pass’.
Grades
Two-grade scale, U, GOther information
About teaching and examination language
The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows:
- If teaching language is “Swedish”, the course as a whole could be given in Swedish, or partly in English. Examination language is Swedish, but parts of the examination can be in English.
- If teaching language is “English”, the course as a whole is taught in English. Examination language is English.
- If teaching language is “Swedish/English”, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English depending on teaching language.
Other
The course is conducted in such a way that there are equal opportunities with regard to sex, transgender identity or expression, ethnicity, religion or other belief, disability, sexual orientation and age.
The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.
The course is campus-based at the location specified for the course, unless otherwise stated under “Teaching and working methods”. Please note, in a campus-based course occasional remote sessions could be included.
Department
Institutionen för fysik, kemi och biologiCourse literature
Books
- Svensson, T., Krysander, C., (2011) Projektmodellen LIPS Lund : Studentlitteratur, 2011.
Websites
- The CDIO initiative http://www.cdio.org
Other
Other recommended reading: Book chapters, articles, and other reading materials will be suggested throughout the project course.
Code | Name | Scope | Grading scale |
---|---|---|---|
UPG1 | Entrepreneurship assignments | 3 credits | U, G |
PRA1 | Group work assignment | 9 credits | U, G |
Details about the written and oral assignments will be provided during the course.
Grades are given as ‘Fail’ or ‘Pass’.
Course syllabus
A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Timetabling
Program courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. Single subject courses can be timetabled at other times.
Interruption in and deregistration from a course
The LiU decision, Guidelines concerning confirmation of participation in education, Dnr LiU-2020-02256 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/764582), states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered are therefore obliged to report the interruption so that this can be noted in Ladok. Deregistration from or interrupting a course is carried out using a Web-based form.
Cancelled courses and changes to the course syllabus
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. For single subject courses, the cancellation must be done before students are admitted to the course (in accordance with LiUs regulation Dnr LiU-2022-01200, https://styrdokument.liu.se/Regelsamling/VisaBeslut/622645).
Guidelines relating to examinations and examiners
For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2022-04445 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.
Forms of examination
Principles for examination
Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the faculty programme board.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and January
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination in March and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
Examinations for courses that the faculty programme board has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.
Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
When a course, or a written or oral examination (TEN, DIT, DAT, MUN), is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the faculty programme board. In all cases above, the examination is also offered one more time during the academic year after the following, unless the faculty programme board decides otherwise. In total, 6 re-examinations are offered, of which 2 are regular re-examinations. In the examination registration system, the examinations given for the penultimate time and the last time are denoted.
If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the faculty programme board or boards determine together the scheduling and frequency of re-examination occasions.
For single subject courses, written and oral examinations can be held at other times.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, Dnr LiU-2023-00379 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
Course closure
For Decision on Routines for Administration of the Discontinuation of Educational Programs, Freestanding Courses and Courses in Programs, see Dnr LiU-2021-04782 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/1156410). After a decision on closure and after the end of the discontinuation period, the students are referred to a replacement course (or similar) according to information in the course syllabus or programme syllabus. If a student has passed some part/parts of a closed program course but not all, and there is an at least partially replacing course, an assessment of crediting can be made. Any crediting of course components is made by the examiner.
Registration for examination
In order to take an written, digital or computer-based examination, registration in advance is mandatory, see decision in the university’s rule book Dnr LiU-2020-04559 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682). An unregistered student can thus not be offered a place. The registration is done at the Student Portal or in the LiU-app during the registration period. The registration period opens 30 days before the date of the examination and closes 10 days before the date of the examination. Candidates are informed of the location of the examination by email, four days in advance.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book, Dnr LiU-2020-04559 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
A retake is not possible on courses that are included in an issued degree diploma.
Grades
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5).
- Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.
Examination components
The following examination components and associated module codes are used at the Faculty of Science and Engineering:
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
- Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).
In general, the following applies:
- Mandatory course components must be scored and given a module code.
- Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
- For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.
For mandatory components, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component.
For possibilities to alternative forms of examinations, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it.
- If the coordinator has recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives.
- An examiner may also decide that an adapted examination or alternative form of examination if the examiner assessed that special circumstances prevail, and the examiner assesses that it is possible while maintaing the objectives of the course.
Reporting of examination results
The examination results for a student are reported at the relevant department.
Plagiarism
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at Cheating, deception and plagiarism.
Linköping University has also produced a guide for teachers and students' use of generative AI in education (Dnr LiU-2023-02660). As a student, you are always expected to gain knowledge of what applies to each course (including the degree project). In general, clarity to where and how generative AI has been used is important.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at https://styrdokument.liu.se/Regelsamling/Innehall.
Books
Websites
Other
Other recommended reading: Book chapters, articles, and other reading materials will be suggested throughout the project course.
Note: The course matrix might contain more information in Swedish.
I | U | A | Modules | Comment | ||
---|---|---|---|---|---|---|
1. DISCIPLINARY KNOWLEDGE AND REASONING | ||||||
1.1 Knowledge of underlying mathematics and science (G1X level) |
|
|
X
|
Basic physics and chemistry; other basic courses depending on the choice of project |
||
1.2 Fundamental engineering knowledge (G1X level) |
X
|
X
|
X
|
PRA1
|
Modeling, simulation, control, regulation |
|
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level) |
|
X
|
X
|
PRA1
|
In topics relevant for the chosen project |
|
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level) |
|
|
|
|||
1.5 Insight into current research and development work |
X
|
|
|
The projects connect to research-relevant methodology |
||
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES | ||||||
2.1 Analytical reasoning and problem solving |
|
X
|
X
|
PRA1
|
Integral part of CDIO project work; project plan and design based on specification of requirements |
|
2.2 Experimentation, investigation, and knowledge discovery |
X
|
X
|
X
|
PRA1
|
Integral part of CDIO project work |
|
2.3 System thinking |
X
|
X
|
X
|
PRA1
|
Integral part of CDIO project work |
|
2.4 Attitudes, thought, and learning |
X
|
X
|
X
|
PRA1
|
Integral part of CDIO project work |
|
2.5 Ethics, equity, and other responsibilities |
|
X
|
X
|
PRA1
|
Work in project group, project management |
|
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION | ||||||
3.1 Teamwork |
|
X
|
X
|
PRA1
|
Project work In group; project models |
|
3.2 Communications |
|
|
X
|
PRA1
|
||
3.3 Communication in foreign languages |
|
|
X
|
PRA1
|
Course language, reports in English |
|
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT | ||||||
4.1 External, societal, and environmental context |
X
|
X
|
X
|
UPG1
PRA1
|
Environmental aspects are linked to NABC |
|
4.2 Enterprise and business context |
X
|
X
|
X
|
UPG1
PRA1
|
Ideas are generated and linked to the CDIO project |
|
4.3 Conceiving, system engineering and management |
X
|
X
|
X
|
UPG1
PRA1
|
Integral part of CDIO project planning; final report |
|
4.4 Designing |
X
|
X
|
X
|
PRA1
|
Construction steps is an integral part of CDIO project work |
|
4.5 Implementing |
X
|
X
|
X
|
PRA1
|
Project work realizes a product, software system, etc. |
|
4.6 Operating |
X
|
X
|
X
|
PRA1
|
Acceptance test, documentation, delivery |
|
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS | ||||||
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development |
|
|
|
|||
5.2 Economic conditions for knowledge development |
|
|
|
|||
5.3 Identification of needs, structuring and planning of research or development projects |
|
|
|
|||
5.4 Execution of research or development projects |
X
|
X
|
X
|
PRA1
|
Project models; project work |
|
5.5 Presentation and evaluation of research or development projects |
X
|
X
|
X
|
PRA1
|
Function and performance evaluation of final product; final presentation and report |
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.
There are no files available for this course.