Master of Science in Applied Physics and Electrical Engineering - International, 300 credits

Civilingenjörsprogram i teknisk fysik och elektroteknik - internationell, 300 hp

6CYYI

This programme occurrence is cancelled.

Teaching language

Swedish

Campus

Linköping

Degree

Master of Science in Engineering 300 credits and Master of Science 120 credits

Pace of study

Full-time
Possible deviation from course syllabus/programme syllabus

Entry requirements

    Degree in Swedish

    Civilingenjör 300 hp och Teknologie master 120 hp

    Degree in English

    Master of Science in Engineering 300 credits and Master of Science 120 credits

    Semester 1 Autumn 2020

    Semester 2 Spring 2021

    Semester 3 Autumn 2021

    Semester 4 Spring 2022

    Semester 5 Autumn 2022

    Semester 6 Spring 2023

    Semester 7 Autumn 2023

    Semester 8 Spring 2024

    Semester 9 Autumn 2024

    Course code Course name Credits Level Timetable module ECV
    Period 1
    TAMS39 Multivariate Statistical Methods 6 A1N 4 E
    The course is given every other year (odd years).
    TATA32 Discrete Mathematics 8* G1N 2 E
    *The course is divided into several semesters and/or periods
    TATA62 Project - Applied Mathematics 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TATA75 Theory of Relativity 6* A1F - E
    *The course is divided into several semesters and/or periods
    The course is only offered every second year, even years.
    TBMT14 Biomedical Engineering - Project Course 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TBMT57 Biomedical Optics 6 A1F 1 E
    TDDC88 Software Engineering 12* A1N 1 E
    *The course is divided into several semesters and/or periods
    TDDE15 Advanced Machine Learning 6 A1F 1 E
    TFKE59 Fundamentals of Chemistry 6 G1X 2 E
    TFYA36 Chaos and Non-Linear Phenomena 6 A1N 2 E
    TFYA40 Analytical Mechanics 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TFYM03 Nanophysics 6 A1X 3 E
    TMMV01 Aerodynamics 6 A1N 3 E
    TNE071 Microwave Engineering 6 A1N 1 E
    The course is given partially as distance learning studies.
    TNE089 Electromagnetic Compatibility (EMC) and Printed Circuit Board (PCB) Design 6* A1N 2 E
    *The course is divided into several semesters and/or periods
    TNM067 Scientific Visualization 6 A1N 3 E
    TPPE53 Financial Valuation Methodology 6 A1F 2 E
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSBB19 Machine Learning for Computer Vision 6 A1N 2 E
    TSBK03 Advanced Game Programming 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TSEA84 Digital Design Project 6* A1F 1 E
    *The course is divided into several semesters and/or periods
    TSEK03 Radio Frequency Integrated Circuits 6 A1F 2 E
    TSFS12 Autonomous Vehicles - Planning, Control, and Learning Systems 6 A1X 1 E
    TSIN01 Information Networks 6 A1N 3 E
    TSIT03 Cryptology 6 A1N 2 E
    TSIT13 Quantum Communication 6 A1N 1 E
    TSKS12 Modern Channel Coding, Inference and Learning 6 A1N 1 E
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSRT10 Automatic Control - Project Course 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSTE17 System Design 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSTE28 Power Electronics 6 A1N 3 E
    Period 2
    TATA32 Discrete Mathematics 8* G1N 3 E
    *The course is divided into several semesters and/or periods
    TATA62 Project - Applied Mathematics 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TATA71 Ordinary Differential Equations and Dynamical Systems 6 G2F 2 E
    TATA75 Theory of Relativity 6* A1F 3 E
    *The course is divided into several semesters and/or periods
    The course is only offered every second year, even years.
    TBMI02 Medical Image Analysis 6 A1N 1 E
    TBMT14 Biomedical Engineering - Project Course 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TDDC88 Software Engineering 12* A1N 1 E
    *The course is divided into several semesters and/or periods
    TDDD37 Database Technology 6 G2F 1 E
    TDDD49 Programming in C# and .NET Framework 4 G2F 3 E
    TDDD56 Multicore and GPU Programming 6 A1N 2 E
    TDDD89 Scientific Method 6 A1F 3 E
    TDDE01 Machine Learning 6 A1N 1 E
    TDDE16 Text Mining 6 A1F 2 E
    TFYA40 Analytical Mechanics 6* A1N 3 E
    *The course is divided into several semesters and/or periods
    TFYA90 Computational Physics 6 A1F 4 E
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TFYB02 Elementary Particles and Quantum Fields 6 A1F 1 E
    TMME50 Flight Mechanics 6 A1N 2 E
    TNE083 Antenna Theory 6 A1F 2 E
    The course is given partially as distance learning studies.
    TNE089 Electromagnetic Compatibility (EMC) and Printed Circuit Board (PCB) Design 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TNM116 eXtended Reality (XR) - Principles and Programming 6 A1N 2 E
    TPPE61 Financial Optimization 6 A1F 2 E
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSBK03 Advanced Game Programming 6* A1N - E
    *The course is divided into several semesters and/or periods
    TSEA26 Design of Embedded DSP Processor 6 A1N 2 E
    TSEA44 Computer Hardware - a System on Chip 6 A1F 1 E
    TSEA84 Digital Design Project 6* A1F 3 E
    *The course is divided into several semesters and/or periods
    TSEK07 Test and measurement of integrated circuits 6 A1F 1 E
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSRT08 Optimal Control 6 A1N 3 E
    TSRT10 Automatic Control - Project Course 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSTE17 System Design 12* A1F 4 E
    *The course is divided into several semesters and/or periods
    TSTE26 Powergrid and Technology for Renewable Production 6 A1N 3 E
    TSTE85 Low Power Electronics 6 A1N 2 E
    Specialisation: Applied Physics - Materials and Nano Physics
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYM03 Nanophysics 6 A1X 3 E
    Period 2
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYA90 Computational Physics 6 A1F 4 E
    Specialisation: Applied Physics - Theory, Modelling and Computation
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TFYA40 Analytical Mechanics 6* A1N 1 C
    *The course is divided into several semesters and/or periods
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYA36 Chaos and Non-Linear Phenomena 6 A1N 2 E
    Period 2
    TFYA40 Analytical Mechanics 6* A1N 3 C
    *The course is divided into several semesters and/or periods
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYB01 Advanced Electromagnetics 6 A1N 2 E
    TFYB02 Elementary Particles and Quantum Fields 6 A1F 1 E
    Specialisation: Biomedical Engineering
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TBMT14 Biomedical Engineering - Project Course 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TAMS39 Multivariate Statistical Methods 6 A1N 4 E
    The course is given every other year (odd years).
    TATM38 Mathematical Models in Biology 6 A1N 3 E
    TBMT57 Biomedical Optics 6 A1F 1 E
    Period 2
    TBMT14 Biomedical Engineering - Project Course 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TBMI02 Medical Image Analysis 6 A1N 1 E
    Specialisation: Communication
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSIN01 Information Networks 6 A1N 3 C
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TSEK03 Radio Frequency Integrated Circuits 6 A1F 2 E
    TSIT03 Cryptology 6 A1N 2 E
    TSKS12 Modern Channel Coding, Inference and Learning 6 A1N 1 E
    Period 2
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    Specialisation: Control and Information Systems
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TATA62 Project - Applied Mathematics 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSRT10 Automatic Control - Project Course 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TDTS06 Computer Networks 6 G2F 1 E
    TSFS12 Autonomous Vehicles - Planning, Control, and Learning Systems 6 A1X 1 E
    Period 2
    TATA62 Project - Applied Mathematics 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSRT10 Automatic Control - Project Course 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSRT08 Optimal Control 6 A1N 3 E
    Specialisation: Data Science and Machine Intelligence
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TAMS39 Multivariate Statistical Methods 6 A1N 4 E
    The course is given every other year (odd years).
    TAOP34 Large Scale Optimization 6 A1N 3 E
    TDDC17 Artificial Intelligence 6 G2F 3 E
    TDDE15 Advanced Machine Learning 6 A1F 1 E
    TSBB06 Multidimensional Signal Analysis 6* A1N 2 E
    *The course is divided into several semesters and/or periods
    TSBB08 Digital Image Processing 6 A1N 4 E
    TSDT14 Signal Theory 6 A1N 1 E
    TSKS12 Modern Channel Coding, Inference and Learning 6 A1N 1 E
    Period 2
    TDDD89 Scientific Method 6 A1F 3 C
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSKS23 Project Course in Signal Processing, Communications and Networking, CDIO 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TBMI02 Medical Image Analysis 6 A1N 1 E
    TDDD37 Database Technology 6 G2F 1 E
    TDDE16 Text Mining 6 A1F 2 E
    TSBB06 Multidimensional Signal Analysis 6* A1N 3 E
    *The course is divided into several semesters and/or periods
    TSRT78 Digital Signal Processing 6 A1F 2 E
    Specialisation: Electronics
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSTE17 System Design 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TNE071 Microwave Engineering 6 A1N 1 E
    The course is given partially as distance learning studies.
    TNE089 Electromagnetic Compatibility (EMC) and Printed Circuit Board (PCB) Design 6* A1N 2 E
    *The course is divided into several semesters and/or periods
    TSEA84 Digital Design Project 6* A1F 1 E
    *The course is divided into several semesters and/or periods
    TSEK03 Radio Frequency Integrated Circuits 6 A1F 2 E
    TSTE28 Power Electronics 6 A1N 3 E
    Period 2
    TSTE17 System Design 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TNE083 Antenna Theory 6 A1F 2 E
    The course is given partially as distance learning studies.
    TNE089 Electromagnetic Compatibility (EMC) and Printed Circuit Board (PCB) Design 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TSEA26 Design of Embedded DSP Processor 6 A1N 2 E
    TSEA44 Computer Hardware - a System on Chip 6 A1F 1 E
    TSEA84 Digital Design Project 6* A1F 3 E
    *The course is divided into several semesters and/or periods
    TSEK07 Test and measurement of integrated circuits 6 A1F 1 E
    TSTE26 Powergrid and Technology for Renewable Production 6 A1N 3 E
    TSTE85 Low Power Electronics 6 A1N 2 E
    Specialisation: Engineering Mathematics
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TATA62 Project - Applied Mathematics 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSRT10 Automatic Control - Project Course 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TATA75 Theory of Relativity 6* A1F - E
    *The course is divided into several semesters and/or periods
    The course is only offered every second year, even years.
    TATM38 Mathematical Models in Biology 6 A1N 3 E
    TDDD38 Advanced Programming in C++ 6* A1N 2 E
    *The course is divided into several semesters and/or periods
    TFYA40 Analytical Mechanics 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TPPE53 Financial Valuation Methodology 6 A1F 2 E
    Period 2
    TATA62 Project - Applied Mathematics 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TSRT10 Automatic Control - Project Course 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TATA71 Ordinary Differential Equations and Dynamical Systems 6 G2F 2 E
    TATA75 Theory of Relativity 6* A1F 3 E
    *The course is divided into several semesters and/or periods
    The course is only offered every second year, even years.
    TDDD38 Advanced Programming in C++ 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TFYA40 Analytical Mechanics 6* A1N 3 E
    *The course is divided into several semesters and/or periods
    TPPE61 Financial Optimization 6 A1F 2 E
    Specialisation: Financial Mathematics
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TATA62 Project - Applied Mathematics 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TPPE53 Financial Valuation Methodology 6 A1F 2 C
    Period 2
    TATA62 Project - Applied Mathematics 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TPPE61 Financial Optimization 6 A1F 2 C
    Specialisation: Mechanics and Control
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSRT10 Automatic Control - Project Course 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYA40 Analytical Mechanics 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TSFS12 Autonomous Vehicles - Planning, Control, and Learning Systems 6 A1X 1 E
    Period 2
    TSRT10 Automatic Control - Project Course 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TFYA40 Analytical Mechanics 6* A1N 3 E
    *The course is divided into several semesters and/or periods
    TMME50 Flight Mechanics 6 A1N 2 E
    TSRT08 Optimal Control 6 A1N 3 E
    Specialisation: Photonics and Quantum Technology
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TBMT57 Biomedical Optics 6 A1F 1 E
    TFYM03 Nanophysics 6 A1X 3 E
    TSIT03 Cryptology 6 A1N 2 E
    TSIT13 Quantum Communication 6 A1N 1 E
    Period 2
    TFYA99 Project Course in Applied Physics, CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TSIT02 Computer Security 6 G2F 2 E
    Specialisation: Signal and Image Processing
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TNM067 Scientific Visualization 6 A1N 3 E
    TSBB19 Machine Learning for Computer Vision 6 A1N 2 E
    TSBK03 Advanced Game Programming 6* A1N 1 E
    *The course is divided into several semesters and/or periods
    TSKS15 Detection and Estimation of Signals 6 A1N 4 E
    Period 2
    TSBB11 Images and Graphics, Project Course CDIO 12* A1F 4 C
    *The course is divided into several semesters and/or periods
    TBMI02 Medical Image Analysis 6 A1N 1 E
    TDDD56 Multicore and GPU Programming 6 A1N 2 E
    TDDE01 Machine Learning 6 A1N 1 E
    TNM116 eXtended Reality (XR) - Principles and Programming 6 A1N 2 E
    TSBK03 Advanced Game Programming 6* A1N - E
    *The course is divided into several semesters and/or periods
    Specialisation: System-on-Chip
    Course code Course name Credits Level Timetable module ECV
    Period 1
    TSTE17 System Design 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TDTS08 Advanced Computer Architecture 6 A1N 2 E
    TSEA84 Digital Design Project 6* A1F 1 E
    *The course is divided into several semesters and/or periods
    Period 2
    TSEA26 Design of Embedded DSP Processor 6 A1N 2 C
    TSTE17 System Design 12* A1F 4 C/E
    *The course is divided into several semesters and/or periods
    TDDD56 Multicore and GPU Programming 6 A1N 2 E
    TSEA44 Computer Hardware - a System on Chip 6 A1F 1 E
    TSEA84 Digital Design Project 6* A1F 3 E
    *The course is divided into several semesters and/or periods
    TSEK07 Test and measurement of integrated circuits 6 A1F 1 E
    TSIT02 Computer Security 6 G2F 2 E
    TSTE85 Low Power Electronics 6 A1N 2 E

    Semester 10 Spring 2025

    Course code Course name Credits Level Timetable module ECV
    Period 1
    TQXX33 Degree project - Master’s Thesis 30* A2E - C
    *The course is divided into several semesters and/or periods
    Period 2
    TQXX33 Degree project - Master’s Thesis 30* A2E - C
    *The course is divided into several semesters and/or periods

    Regulations for compulsory study abroad for Ii & Yi through exchange agreements arranged by the Faculty of Science and Engineering at Linköping University

    Students taking the master’s programmes Industrial Engineering and Management – International and Applied Physics and Electrical Engineering – International must study for one academic year at a university located in the relevant language region for the programme. At least 30 credits of the 60 that the year abroad constitutes must be taken in the language of specialisation of the programme, and it must be possible to use the credits obtained in the study programme. Regulations for the compulsory components of the programme to be taken abroad are available (in Swedish) at http://styrdokument.liu.se/Regelsamling/VisaBeslut/755476. 

    Structure and organisation of study programmes

    The contents and design of the programmes are to be continuously revised such that new knowledge is integrated into courses and specialisations. Within one programme, several study specialisations or profiles may be available. The identities of the study specialisations or profiles and the regulations governing how these may be selected are given in the syllabus and curriculum for the particular field of study and programmes.

    The structure and organisation of the programmes are to follow specified criteria that are summarised in the syllabus for each programme.

    • The syllabus defines the aims of the study programme.
    • The curriculum, which constitutes one part of the syllabus for the field of study, gives details of the terms in which the various courses have been timetabled, and their scheduling through the academic year.
    • The course syllabus specifies, among other things, the aim and contents of the course, and the prior knowledge that a student must have, in addition to the admission requirements for the programme, in order to be able to benefit from the course.

    Qualification requirements

    The qualification requirements specified in the Higher Education Ordinance 2007 apply to students admitted after 1 July 2007. A student who has completed components of a programme after 1 July 2007 has the right to be assessed with respect to the qualification requirements specified by the Higher Education Ordinance 2007. In addition, local regulations laid down by the faculty boards and university board apply, see http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Examina.

    Higher Education Act Chapter 1, Section 8:

    First-cycle courses and study programmes are to develop:

    • the ability to make independent and critical assessments
    • the ability to identify, formulate and solve problems autonomously, and
    • the preparedness to deal with changes in working life.

    In addition to knowledge and skills in their field of study, students shall develop the ability to:

    • gather and interpret information at a scholarly level
    • stay abreast of the development of knowledge, and
    • communicate their knowledge to others, including those who lack specialist knowledge in the field.

    Qualifications within a study programme

    Qualification requirements that are specific to a study programme are given in the syllabus for that programme.

    Admission requirements and matriculation and postponement of matriculation

    A person who has been accepted for a study programme is to start their studies (matriculate) in the term that is specified in the decision about admission. The date and location of the compulsory matriculation procedure will be communicated to those admitted to the first term of the programme.

    Regulations concerning admission requirements, matriculation and postponement of matriculation have been laid down in the admission regulations for Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622645.

    Admission to a later part of a programme

    Admission to a part of a study programme is used here to refer to admission with the purpose of completing the programme and taking a degree. Admission to a later part of a programme may take place only if sufficient resources and space on the programme are available. Furthermore, the applicant must satisfy the entry requirements for the relevant term of the programme, as specified in http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Tekniska_fakulteten.

    Interruption in studies

    Notification of an interruption in studies is to be made through a web form, https://www.lith.liu.se/for-studenter/anmalan-studieuppehall?l=en. If such a notification is not made and if the student does not do a course registration during the first term during which the interruption is to take place, the interruption will be considered to be a withdrawal. An interruption in studies must cover a complete term, and notification of interruptions can be given for a maximum of two consecutive terms. Notification of resumption of studies is to take place at the course registration for the term that follows the interruption. 

    A student who is taking an interruption in studies may during this period retake examinations. The student is responsible that registration for courses is carried out at the correct times in preparation for the resumption of studies.

    Withdrawal from a study programme

    A student who wishes to withdraw from a study programme must notify the study guidance counsellor. A student who leaves the studies without giving notification of an interruption in study and who fails to register on a course for the immediately subsequent term is considered to have withdrawn. A student who has withdrawn may return to the study programme if a vacancy is available that is not required for students returning after an interruption in study, and not required for students who are changing their location of study and/or study programme.

    Courses within a study programme

    The curriculum for the various years of a study programme specify which courses are mandatory (m), elective (e) and voluntary (v). If a student wishes to study a different combination than the one specified in the curriculum, an application must be made to the board of studies.

    Voluntary courses

    The course specified as voluntary (labelled with “v”) in the programme syllabus are assessed solely as voluntary courses, and credits from these may not contribute to the requirements for a degree.

    Courses from another study programme or third-cycle courses

    To include courses in a degree from another study programme or third-cycle courses, the student need to apply to and be granted this from the board of studies. If such a decision is not taken, such courses are regarded as voluntary courses.

    When selecting a course from another programme, the admission requirements specified in the course syllabus must be satisfied.

    Admission is granted to the extent that resources allow, provided that places are available on the course.

    Admission to third-cycle courses requires studies at Master's level, i.e. year 4-5 or admitted to a Master's programme. Information can be obtained from the relevant director of advanced studies. 

    Students taking a master’s programme in engineering

    Students taking a master’s programme in engineering can apply to take courses given in Term 7 and later terms of the programme from all engineering master’s programmes. Admission to courses at Term 7 or higher requires the possession of at least 150 credits within the programme to which the student has been admitted.

    Students taking a Bachelor of Science (Engineering)

    Students taking Bachelor of Science (Engineering) degrees may apply to take courses specified in the programme syllabuses of all Bachelor of Science (Engineering) programmes. 

    Students taking a Bachelor of Science

    Students taking Bachelor of Science degrees may apply to take courses specified in the programme syllabuses of all Bachelor of Science programmes.  

    Single-subject courses, courses from other faculties, or other Higher Education Institutions

    To include single-subject courses, courses from another faculty, or courses from other Higher Education Institutions in a degree, the student need to apply to and be granted this from the board of studies. 

     

    Registration for programme courses

    Registration for courses that are given as part of a study programme must be made during the specified period, which has been preliminarily set to 1-10 April for the autumn term, and 1-10 October for the spring term. Information about course registration is published on the Study councellors webpages or in programme rooms, sent to students by email, and disseminated at scheduled information meetings.

    Registration for programme courses as single-subject courses

    Admission to a programme course as a single-subject subject course may take place only if sufficient resources and space on the course are available. Furthermore, the applicant must satisfy the entry requirements for the relevant course.

    In the event of a scarcity of resources, the board of LiTH can decide to limit the possibilities of taking courses that are part of a programme as freestanding courses.

    Study planning

    Students who require support in planning their continued studies can contact the study guidance counsellor of the programme. Study planning involves the student and the study guidance counsellor together drawing up an individual plan for studies during the subsequent term. The individual plan may allow the student to deviate from the general curriculum.

    Completed first-cycle courses are a precondition for successful studies at more advanced levels. For this reason, study planning is based on giving priority to courses from earlier years of study that have not been completed. If further capacity is available, new courses may be taken.

    Study planning takes place on a regular basis if the student:

    • does not satisfy the requirements for progression to later terms. In order for a student to be able to participate in courses from later years in such cases, a decision of exemption is required.
    • does not satisfy the requirements for starting a degree project.

    Other situations in which study planning may be required:

    • A student has fallen behind during the early part of a study programme and has failed to complete several courses.
    • A student has not satisfied the entry requirements for a degree project before term 6 of an engineering degree.
    • A student has applied for admission to a later part of a programme.
    • Studies have been carried out abroad.
    • A study programme is to be resumed after an interruption.

    In these cases the study guidance counsellor supports the student in planning the continued studies, also in situations in which the student can register for the relevant courses without the need for a special decision for the continued studies.

    Part of education abroad

    Students can exchange study at LiTH for study at an institute of higher education abroad, and/or work on a degree project abroad.

    In the event that study (courses) at LiTH are exchanged for study abroad, the faculty programme director is responsible for a decision about a preliminary individual study plan, which is to be drawn up in advance. After the exchange, the student apply to credit completed courses from the exchange into their degree. The guideline for credit assessment in an exchange is that the courses should be in line with the program's orientation. 

    Regulations for entry requirements, ranking and nomination for study abroad through LiTH’s exchange agreements and for the compulsory study abroad period within Ii (Industrial Engineering and Management – International) and Yi (Applied Physics and Electrical Engineering – International) can be found at: http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva/Tekniska_fakulteten.

    Course syllabus

    A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

    Timetabling

    Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. 

    Interrupting a course

    The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en. 

    Cancelled courses

    Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

    Guidelines relating to examinations and examiners 

    For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

    An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

    Forms of examination

    Examination

    Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

    Principles for examination scheduling for courses that follow the study periods:

    • courses given in VT1 are examined for the first time in March, with re-examination in June and August
    • courses given in VT2 are examined for the first time in May, with re-examination in August and October
    • courses given in HT1 are examined for the first time in October, with re-examination in January and August
    • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

    The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

    Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

    Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

    When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.

    If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

    Registration for examination

    In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

    Symbols used in the examination registration system:

      ** denotes that the examination is being given for the penultimate time.

      * denotes that the examination is being given for the last time.

    Code of conduct for students during examinations

    Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

    Retakes for higher grade

    Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

    A retake is not possible on courses that are included in an issued degree diploma. 

    Retakes of other forms of examination

    Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

    Plagiarism

    For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

    A failure to specify such sources may be regarded as attempted deception during examination.

    Attempts to cheat

    In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.

    Grades

    The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

    1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
    2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
    3. Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

    Examination components

    1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
    2. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
    3. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
    4. Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

    For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592). 

    For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

    The examination results for a student are reported at the relevant department.

    Regulations (apply to LiU in its entirety)

    The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

    LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

    Degree project for Master’s Degree in Engineering 300 credits, Master of Science (Two years), Master of Philosophy (Two years), Master of Science (One year), and master’s degrees without prefix

    General provisions for the degree project are given here. A specific board of studies may have supplementary regulations that are specific for a study programme. These are specified, where relevant, in the syllabus for the field of education and/or the degree project. Information and links to course syllabuses, registration, reflection documents, etc. can be found at https://www.lith.liu.se/examensarbete/examensarbete?l=en.

    General provisions

    To be awarded a Master’s Degree in Engineering 300 credits, Master of Science (Two years), Master of Philosophy (Two years), Master of Science (One year), or master’s degree without prefix a student must carry out an approved degree project. The components of the degree project are described in the relevant course syllabus.

    Aim

    The aim of the degree project is described in the relevant course syllabus, https://www.lith.liu.se/examensarbete/examensarbete?l=en. Links to respective course syllabus can be found under the respective headings Master's programme, Civilingenjörsutbildning (only in Swedish), Högskoleingenjörsutbildning (only in Swedish), Kandidatutbildning (only in Swedish).

    Extent

    Requirements for the extent of the degree project for each type of degree are given in the syllabus of the study programme.

    Locations for a degree project

    The work is carried out in the form of:

    • an internal degree project located at one of the participating departments at LiU
    • an external degree project located at a company, government agency, or other organisation in Sweden or abroad, that an examiner has assessed is able to manage a degree project that satisfies the requirements, or
    • a degree project within an exchange agreement in association with study abroad, whereby all study results are to be credited to the student by the relevant board of studies.

    The main subject areas that are permitted within each study programme are described in the programme syllabus. Any individual subjects that may be relevant to the main subject area are to be determined by the relevant board of studies.

    The examiner for a degree project within a certain subject area are determined by the board of studies that is responsible for general degrees within the main subject area. An up-to-date list is given at https://www.lith.liu.se/examensarbete/examensarbete?l=en.

    Degree projects within agreements relating to study abroad

    During study abroad that takes place within the framework of an agreement, the provisions of the host institute relating to degree projects are applied. The student is to consult the board of studies and together ensure that the proposed degree project is carried out in a main subject area that is permitted within the study programme. Approved main subject areas for degree projects are specified in the syllabus for the relevant programme.

    A certificate confirming that the degree project has been approved and a copy of the degree project thesis (in PDF format) are to be submitted to the relevant board of studies.

    Selection of degree project

    A degree project is to be selected in consultation with an examiner, who is also responsible that the specialisation, extent and level of the project satisfy the requirements specified in the course syllabus.

    In cases in which issues relating to work-related copyright, patenting or remuneration may arise, provisions governing these should be established in advance. A student working on a degree project may sign a confidentiality agreement in order to obtain access to confidential information necessary for the degree project. The supervisor and examiner, however, determine whether they are prepared to sign a confidentiality agreement, and thus the confidential information must not normally be of such nature that it is necessary to supervise or grade the work. The complete degree project thesis is to be published during the grading procedure, unless special circumstances prevent this. If any part of the thesis should not be published, this must be approved in advance by the examiner and the relevant head of department. Note that final decisions relating to confidentiality are taken by an administrative court.

    Commencement of a degree project

    Requirements that must be satisfied before a degree project can be started are given in the currently valid course syllabus, which can be obtained in the relevant programme syllabus at https://liu.se/studieinfo/en.

    Notification of a degree project is to be carried out when the degree project starts, at https://www.lith.liu.se/for-studenter/anmalan-till-exjobb?l=en. Registration of the degree project is to take place before work commences.

    Before the start of the degree project, the examiner is to ensure that the student satisfies the conditions for commencement of the degree project within the relevant main subject area. Support in this can be obtained from the study guidance counsellor, who checks the general requirements for starting the degree project.

    The student is also to notify the relevant department of the start of the degree project.

    Degree projects in collaboration with another student

    In cases in which two students carry out a degree project together, the contribution of each student is to be specified. The extent of the work is to correspond to the extent of two individual projects. The examiner is to ensure that each student has contributed in a satisfactory manner to the work, and that each student satisfies the requirements for achieving a Pass grade for the degree project.

    Degree projects carried out in collaboration between more than two students are not permitted.

    Examiners

    The examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). The following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. The examiner must also have the expertise required to examine degree projects within the relevant main subject area, and be appointed by the board of studies. The board of studies can also appoint emerita/emeritus as examiner for a single thesis work.

    The examiner is to:

    • ensure before the start of the degree project that the student satisfies the conditions for commencement of the degree project within the relevant main subject area. The study guidance counsellor is to check whether the commencement criteria are satisfied and inform the examiner of this
    • check whether special admission requirements (where relevant) are satisfied, for example that the student can demonstrate a certain degree of in-depth knowledge within the field relevant for the degree project 
    • determine the specialisation and principal work of the degree project, based on an assessment of whether the degree project will result in the learning outcomes of the course syllabus being satisfied
    • pass/fail the planning report
    • pass/fail the mid-way assessment
    • be responsible that the supervisor or supervisors carry out their duties
    • in conjunction with the planning report, check that the student has registered for the degree project
    • approve the work for presentation
    • before the presentation, check that the proposed opponent satisfies the conditions for commencement of the degree project and has attended three thesis presentations
    • pass/fail the presentation and the opposition to it
    • approve a concluding reflection document
    • ensure that a degree project that has been passed satisfies the learning outcomes of the course syllabus and other requirements, and award a grade to the degree project (either G = Pass, or U = Fail).

    In cases in which a degree project is carried out jointly by two students with different main subject areas, one examiner in each main subject area must be appointed, where this is necessary.

    Supervisors

    A student working on a degree project is to have access to an internal supervisor at the department at which the degree project has been registered. The internal supervisor is to have a degree that corresponds at least to the level of the degree project to be supervised. The internal supervisor may, in exceptional circumstances, be the same individual as the examiner. A decision of whether to allow this in a particular case is to be made by the relevant board of studies before the degree project is started.

    The supervisor is to ensure that the student obtains help with:

    • expert support in general questions related to methods, specialist knowledge of the subject, and writing the thesis
    • problem formulation, and setting the limits of the work
    • scheduling and planning work, and selection of appropriate methods.

    If the degree project is being carried out outside of LiTH, an external supervisor from the commissioner is to be appointed.

    Planning report

    During the first weeks of the degree project, the student is to draw up a planning report that contains:

    • a preliminary title of the degree project
    • a preliminary statement of the research question, against the background of a literature search
    • a preliminary description of the approach to be taken
    • planned literature foundation
    • a schedule for the execution of the degree project, including suggested dates for the mid-way assessment and presentation.

    Formulation of the research question is to be bounded, realistic and viewed from a perspective of societal or commercial benefit. The term “societal” is to be understood here to include universities and university colleges.

    Mid-way assessment

    Approximately half-way through the degree project, the student is to describe to the examiner at a mid-way assessment how the work is progressing relative to the planning report. The supervisor should also participate. The form of the mid-way assessment may be anything from an oral presentation to a public seminar. The conclusion of the mid-way assessment may be one of three possibilities:

    1. The work has been carried out essentially as planned, and can continue as planned. The mid-way assessment has been passed.
    2. The work has been carried out with certain deviations from the planning report. It is, however, believed that it will be possible to complete the work with minor adjustments to the formulation of the research question, approach and/or schedule. The mid-way assessment has been passed.
    3. The work has deviated from the planning report in a significant manner, and there is a risk that a Pass grade cannot be given. The mid-way assessment has been failed. A new planning report must be drawn up and a new mid-way assessment carried out.

    Reporting

    Both oral and written reports of the degree project are to be made, in Swedish or English. For the international Master's programmes, both the oral and written examination should be made in English. The board of studies can allow the reporting to be carried out in another language than Swedish or English.

    The oral presentation is to take place in public, unless there are special grounds that this should not be done. The written report is to be in the form of a professionally produced degree project thesis. The presentation and thesis are to follow the instructions given below.

    Presentation

    The oral presentation is to take place when the examiner considers that the work has been completed and is ready to be presented. The presentation is to take place at LiTH at a time when other students can attend. This means that the presentation can take place on a date that the student has agreed with the examiner, normally between the re-examination period in August and midsummer, and after the student has attended three thesis presentations.

    The oral presentation is to describe the background to the problem that has been studied, describe the methods used, and present the results and conclusions. The presentation is to be at a level suitable for everyone present, not just for specialists. After the oral presentation, the student is to counter any criticism that the opponent may raise, and allow other participants to pose questions. The presentation and the opposition are to be approved by the examiner. When any required adjustments of the thesis have been made, the reflection document has been approved, and the student has functioned as an opponent for another degree project, the degree project is reported as a passed course and the credits can be used to satisfy the requirements for a qualification.

    Degree project thesis

    The written degree project report is to be professionally written and comprehensive, and it is to demonstrate a scientific approach. The report must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc., of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as undergraduate work, project reports, etc. (This is sometimes known as “self-plagiarism”.) A failure to specify such sources may be regarded as attempted deception during examination.

    The contents are to be easy to understand, and the way in which material is presented is important. It must describe the background to the project and the formulation of the research question. The choice of approach is to be clearly explained, and the thesis should make clear the coupling between the results and the conclusions. Commonly accepted scientific methods are to be used for processing the results. The discussion is to be comprehensive, and demonstrate that the student masters analytical thought processes. The thesis is to demonstrate good mastery of the literature in the field, and include an abstract. Theses that are principally written in Swedish should contain a summary in English. A publication-ready manuscript and a reflection document covering the work undertaken are to be submitted to the examiner within 10 days after the oral presentation. The examiner may grant an exemption from this requirement. If final versions of the required documents are not submitted as stipulated, the examiner may determine that the presentation is to be rescheduled.

    The Faculty of Science and Engineering (Institute of Technology) at Linköping University recommends that degree project theses be published.

    Opposition

    An oral opposition is to be carried out either before or after the student presents his or her thesis. The opponent must satisfy the same requirements for the number and level of credits gained as those of the student’s degree project. The opponent must also have attended three thesis presentations as a member of the audience. Acting as an opponent during the thesis presentation of another student is subject to points-based assessment as described in the course syllabus.

    The opponent is to:

    • discuss and comment on the selection of methods, results and (where relevant) data processing, conclusions, possible alternative solutions and conclusions, and the management of literature
    • comment on the general arrangement of the degree project thesis and related, formal aspects of style, and comment on the oral presentation technique
    • illuminate the strengths and weaknesses of the thesis.

    The duration of the opposition should be approximately the same as that of the presentation, and it is to include a discussion in which the student presenting the thesis replies to and comments on the criticism raised by the opponent.

    Unless otherwise agreed, at least one week before the presentation the opponent is to present in writing to the examiner the important issues that will be discussed, and the structure of the opposition that will be taken. The opponent and the examiner discuss the structure that the opponent has drawn up.

    In a normal case, the number of opponents will be the same as the number of respondents. In exceptional cases, the examiner may decide that this is not to be the case.

    Attendance at presentations

    A student is to attend presentations of degree project theses as described in the course syllabus. The presentations attended must be at the same level or a higher level than the degree project of the student.

    It is advantageous that one of the presentations attended is a licenciate degree seminar or a doctoral disputation. The student is responsible for ensuring that a certification of attendance at the presentation is obtained and passed to the departmental administrator for registration in Ladok. Attendance at such presentations is a component of the degree work that is subject to points-based assessment.

    The occasions on which a student attends presentations are to be completed before the student presents the degree project thesis. The course syllabus for the degree project describes the scheduling of the attendance at presentations.

    Reflection document

    A document reflecting on the work that has been carried out is to be submitted to the examiner within 10 working days of the oral presentation. Instructions for preparing a reflection document can be reached through https://www.lith.liu.se/examensarbete/reflektionsdokument?l=en.

    Grades

    The degree project is graded as either Pass or Fail. In order for a student to obtain a pass grade for the degree project, all components must be completed and be awarded a pass grade.

    Right to obtain supervision

    It is expected that the student complete and pass a degree project within specified time limits. The department is required to provide supervision for a maximum of 18 months after the student has registered the degree project in Ladok. The examiner may grant additional supervision after this period in special cases. If the examiner determines that supervision is to be ended, the degree project is to be awarded a Fail grade. The examiner does not have to fail the degree project if it is considered possible that the student can finish the thesis without further supervision.

    If the degree project is awarded a Fail grade for the reason described above or for any other reason, the student is to be directed towards carrying out a further degree project.

    Quality assurance

    The relevant board of studies has overall responsibility for the quality of study programmes. This responsibility covers also degree projects. Quality assurance is to be carried out as determined by the faculty board.

    Exemptions

    If special circumstances apply, a board of studies may grant exemptions from the regulations specified above. The oral opposition, for example, may be replaced by an extensive written opposition, if the board of studies approves this

    • for international students for whom special circumstances apply
    • for other students for whom all other components of the qualification have been satisfied, the degree project thesis has been submitted, and special circumstances apply.

    Written opposition may be carried out in one of the following ways:

    • The student presents a written opposition to a degree project thesis that has been written by another student, whose examiner subsequently examines the opposition.
    • The student’s examiner requests that the student prepare a written opposition to a degree project thesis that has previously been examined by an examiner.

    If written opposition is used, it is not necessary that the student prepare an introductory statement describing the structure.

    The examiner applies to the board of studies for exemption regarding written opposition. The board of studies must approve that opposition may take place in written form, before it is carried out.

    Degree projects (included in Term 6 of study programmes in engineering)

    General provisions

    All study programmes in engineering (with the exception of the programme in Industrial Engineering and Management – International and the programme in Applied Physics and Electrical Engineering – International) have since 2014 included an obligatory degree project. The project undertaken may also be included as part of the Bachelor of Science (Technology). During Term 6 of each programme, one or several special courses are given that constitute degree projects. The syllabuses of these courses contain course-specific provisions, which are supplemented with the general provisions given below.

    Aim

    The degree project is to contribute to general and programme-specific objectives of the study programmes in engineering being achieved. Specific learning outcomes are given in the relevant course syllabus. In addition, the degree project has also the following learning outcomes, which are common to all degree project-based courses at LiTH:

    • Knowledge of the subject
      ​After carrying out the degree project, the student is expected to master the following:
      • integrating in a systematic manner the knowledge gained during the period of study
      • applying methodological knowledge and subject-specific knowledge within the main subject area
      • assimilating the contents of relevant technical publications and relating the study to such contents.
    • Personal and professional skills
      ​After carrying out the degree project, the student is expected to possess the following skills:
      • formulating research questions and limiting the same, within a specified time schedule
      • seeking and evaluating scientific literature.
    • Working and communicating in a group
      ​After carrying out the degree project, the student is expected to possess the following skills:
      • planning, executing and presenting independent work in the form of a project carried out in a group
      • expressing oneself professionally, in writing and orally
      • critically examining and discussing independent work presented in speech and in writing.
    • Engineering fundamentals
      ​After carrying out the degree project, the student is expected to master the following:
      • creating, analysing and/or evaluating technical solutions
      • making assessments that consider relevant scientific, societal and ethical aspects.

    Degree projects undertaken while studying abroad

    During study abroad, an individual plan is to be drawn up together with the faculty programme director to determine how the requirements for a degree project in engineering can be satisfied.

    Commencing a degree project

    Before a student commences a degree project, the following requirements must be satisfied:

    • The student must have a minimum of 90 credits obtained from courses from Terms 1-4 of the programme (courses taken voluntarily are not counted). This requirement must be satisfied before the end of the third week of study period 2 of the autumn term before the degree project is to be carried out.
    • The student must have completed the subject-specific courses listed in the course syllabus for the relevant degree project course. This requirement must be satisfied before the end of the third week of study period 2 of the autumn term before the degree project is to be carried out.
    • When assessing whether the requirements have been satisfied, individual decisions (such as those taken in association with admission to subsequent parts of the programme) are to be considered.

    Registration for a degree project is carried out during the course registration period 1-10 October in the autumn before the degree project is to be undertaken. 

    Forms of examination

    The examiner for the degree project is responsible for ensuring that examination takes place as specified by the course syllabus, and, where appropriate, carries out the duties of an examiner for degree projects.

    The written report of the degree project corresponds to a degree project for a bachelor's degree. This means that it is to be managed in an equivalent manner with respect to publication, unless special circumstances apply.

    The report must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc., of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as undergraduate work, project reports, etc. (This is sometimes known as “self-plagiarism”.) A failure to specify such sources may be regarded as attempted deception during examination.

    In cases in which several students carry out a degree project together, the contribution of each student is to be specified. The extent of the work for each student is to correspond to that of a degree project. The examiner is to ensure that each student has contributed in a satisfactory manner to the work, and that each student satisfies the requirements for achieving a Pass grade for the degree project.

    Student rights and obligations (login required)
    Linköping University common rules and regulations (in Swedish)