Engineering Project, 6 credits
Ingenjörsprojekt, 6 hp
TFYY51
Main field of study
Electrical Engineering Applied PhysicsCourse level
First cycleCourse type
Programme courseExaminer
Urban ForsbergDirector of studies or equivalent
Magnus BomanEducation components
Preliminary scheduled hours: 108 hRecommended self-study hours: 52 h
Main field of study
Electrical Engineering, Applied PhysicsCourse level
First cycleAdvancement level
G1XCourse offered for
- Master of Science in Biomedical Engineering
- Master of Science in Applied Physics and Electrical Engineering - International
- Master of Science in Applied Physics and Electrical Engineering
Entry requirements
Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.
Intended learning outcomes
The course should give the students a perspective on engineering and the future role as an engineer. In specific, the course should introduce basic methods for project work. During the course a project will be performed on a topic of relevance for the Applied Physics and Electrical Engineering programme. After the examination of this course the students should know how to:
- work in a project according to a project model
- plan a project work from a given specification
- make and modify a project plan
- find knowledge of relevance to solve the project tasks
- relate basic concepts in physics and electronics to engineering work
- collaborate to make the work in a project group successful
- administrate and document an ongoing project work
- present the results from the project work both orally and in a written report
- reflect on the finished work and suggest improvements
Course content
Lectures - Introductory lecture, CDIO, project descriptions, situating the engineering profession, group dynamics when working together, model for project work at LiTH, communication. Industry related guest lectures. The engineers role as a communicator. Analysis of and adaptation to receivers. Written presentation. Linguistic and formal aspects of technical documents: instructions, reports and descriptions. How to prepare and execute an oral presentation.
- Project work - Contents according to the specific task (all projects are described in brief on the course webpage). Work according to the project model LIPS. Writing of project plan. Administration and documentation of the ongoing work. Demonstration and presentation of results. Writing of report. Reflections on the finished work.
Teaching and working methods
The lectures aim to prepare the students for the project work bringing up topics on project models, group work, written and oral communication and information search as well as to give the students an insight in their future role as engineers by inviting guest lecturers graduated from the Applied Physics and Electrical Engineering programme. The lectures on information search are given for smaller groups at the library.
The project work is done in groups of 5-6 students. The groups are put together by the course management. Each group is assigned to a specific project task and a teacher acting as a customer. The customer presents a specification of the project task to the project group. From this specification the group will make a project plan and perform a project work according to the project model LIPS. Each group has frequent meetings with a teacher acting as a mentor/supervisor. The work is documented in a written report and presented orally to the customer. At the end of the course the work is also presented for the other students at a project conference.
The course runs over the entire autumn semester.
Examination
UPG2 | Project | 4.5 credits | U, G |
UPG1 | Seminars | 1.5 credits | U, G |
Grades are given as ‘Fail’ or ‘Pass’.
Grades
Two grade scale, older version, U, GDepartment
Institutionen för fysik, kemi och biologiDirector of Studies or equivalent
Magnus BomanExaminer
Urban ForsbergCourse website and other links
http://www.ifm.liu.se/undergrad/fysikgtu/coursepage.html?selection=all&sort=kkEducation components
Preliminary scheduled hours: 108 hRecommended self-study hours: 52 h
Course literature
Books
- T. Svensson, C. Krysander, Projektmodellen LIPS ver 1.2
Other
Code | Name | Scope | Grading scale |
---|---|---|---|
UPG2 | Project | 4.5 credits | U, G |
UPG1 | Seminars | 1.5 credits | U, G |
Grades are given as ‘Fail’ or ‘Pass’.
Course syllabus
A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Timetabling
Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.
Interrupting a course
The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv.
Cancelled courses
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus.
Regulations relating to examinations and examiners
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
Forms of examination
Examination
Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and October
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
- Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
- Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
- If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
- If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.
Registration for examination
In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.
Symbols used in the examination registration system:
** denotes that the examination is being given for the penultimate time.
* denotes that the examination is being given for the last time.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
Plagiarism
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.
Grades
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.
- Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
Examination components
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
- Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
The examination results for a student are reported at the relevant department.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva.
Books
Other
Note: The course matrix might contain more information in Swedish.
I | U | A | Modules | Comment | ||
---|---|---|---|---|---|---|
1. DISCIPLINARY KNOWLEDGE AND REASONING | ||||||
1.1 Knowledge of underlying mathematics and science (G1X level) |
|
|
|
|||
1.2 Fundamental engineering knowledge (G1X level) |
|
|
|
|||
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level) |
|
|
|
|||
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level) |
|
|
|
|||
1.5 Insight into current research and development work |
|
|
|
|||
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES | ||||||
2.1 Analytical reasoning and problem solving |
X
|
X
|
|
UPG1
UPG2
|
||
2.2 Experimentation, investigation, and knowledge discovery |
X
|
|
|
|||
2.3 System thinking |
|
|
|
|||
2.4 Attitudes, thought, and learning |
|
|
|
|||
2.5 Ethics, equity, and other responsibilities |
|
|
|
|||
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION | ||||||
3.1 Teamwork |
X
|
X
|
|
UPG1
UPG2
|
||
3.2 Communications |
X
|
X
|
X
|
UPG1
UPG2
|
||
3.3 Communication in foreign languages |
|
|
X
|
|||
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT | ||||||
4.1 External, societal, and environmental context |
|
X
|
|
UPG1
|
||
4.2 Enterprise and business context |
|
X
|
|
UPG2
|
||
4.3 Conceiving, system engineering and management |
|
X
|
|
UPG2
|
||
4.4 Designing |
|
X
|
|
UPG2
|
||
4.5 Implementing |
|
X
|
|
UPG2
|
||
4.6 Operating |
|
|
|
|||
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS | ||||||
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development |
|
|
|
|||
5.2 Economic conditions for knowledge development |
X
|
|
|
|||
5.3 Identification of needs, structuring and planning of research or development projects |
X
|
|
|
|||
5.4 Execution of research or development projects |
X
|
|
|
|||
5.5 Presentation and evaluation of research or development projects |
X
|
X
|
X
|
UPG1
UPG2
|
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.
There are no files available for this course.